+2 -2

manual/configure_rockbox/display_options.tex

··· 270 270 \item[Minimum and maximum range.] 271 271 These two options define the full value range that the peak meter 272 272 displays. Recommended values for the \setting{Logarithmic} (dB) setting 273 273 - are {}-40~dB for minimum and 0~dB for maximum. Recommended values 274 274 - for \setting{Linear} display are 0 and 100\%. Note that {}-40~dB is 273 273 + are $-40$~dB for minimum and 0~dB for maximum. Recommended values 274 274 + for \setting{Linear} display are 0 and 100\%. Note that $-40$~dB is 275 275 approximately 1\% in linear value, but if you change the minimum 276 276 setting in linear mode slightly and then change to the dB scale, 277 277 there will be a large change. You can use these values for `zooming'

+1 -1

manual/configure_rockbox/playback_options.tex

··· 192 192 much, so here you can compensate for that. Please note that a 193 193 (large) positive pre-amp setting can cause clipping, unless 194 194 prevent clipping is enabled. The pre-amp can be set to any 195 195 - decibel (dB) value between -12~dB and +12~dB, in increments of 0.5~dB. 195 195 + decibel (dB) value between $-12$~dB and +12~dB, in increments of 0.5~dB. 196 196 \end{description} 197 197 198 198 \section{Track Skip Beep}

+5 -5

manual/configure_rockbox/recording_settings.tex

··· 222 222 automatically controlling the gain while recording. 223 223 \begin{description} 224 224 \item[Safety (clip).] 225 225 - This preset will lower the gain when the levels get too high (-1~dB) 225 225 + This preset will lower the gain when the levels get too high ($-1$~dB) 226 226 and will never increase gain. 227 227 228 228 \item[Live (slow).] 229 229 This preset is designed to be used for recording of live shows and has 230 230 quite large headroom for loud parts. It heads for a nominal target peak 231 231 - level of -9~dB and will slowly increase or decrease gain to reach it. 231 231 + level of $-9$~dB and will slowly increase or decrease gain to reach it. 232 232 233 233 \item[DJ-Set (slow).] 234 234 - This preset heads for a nominal target peak level of -5~dB and will 234 234 + This preset heads for a nominal target peak level of $-5$~dB and will 235 235 slowly increase or decrease gain to reach it. 236 236 237 237 \item[Medium.] 238 238 - This preset heads for a nominal target peak level of -6~dB and will 238 238 + This preset heads for a nominal target peak level of $-6$~dB and will 239 239 increase or decrease gain to reach it. 240 240 241 241 \item[Voice (fast).] 242 242 This preset is designed to be used for voice recording and heads for a 243 243 - nominal target peak level of -7~dB and will quickly increase or 243 243 + nominal target peak level of $-7$~dB and will quickly increase or 244 244 decrease gain to reach it. 245 245 \end{description} 246 246

+21 -21

manual/configure_rockbox/sound_settings.tex

··· 17 17 an otherwise low volume level. 18 18 } 19 19 The volume can be adjusted from a 20 20 - \opt{iriverh100,iriverh300}{minimum of -84~dB to a maximum of 0~dB.}% 20 20 + \opt{iriverh100,iriverh300}{minimum of $-84$~dB to a maximum of 0~dB.}% 21 21 \opt{iaudiom3,iaudiom5,iaudiox5,ipod3g,ipod4g,gigabeatf,mrobe100,mpiohd200}{% 22 22 - minimum of -73~dB to a maximum of +6~dB.}% 23 23 - \opt{ipodnano}{minimum of -72~dB to a maximum of +6~dB.}% 24 24 - \opt{ipodvideo,cowond2}{minimum of -89~dB to a maximum of +6~dB.}% 22 22 + minimum of $-73$~dB to a maximum of +6~dB.}% 23 23 + \opt{ipodnano}{minimum of $-72$~dB to a maximum of +6~dB.}% 24 24 + \opt{ipodvideo,cowond2}{minimum of $-89$~dB to a maximum of +6~dB.}% 25 25 \opt{ipodnano2g,ipodcolor,ipod1g2g,iriverh10,iriverh10_5gb,sansa,sansaAMS}{minimum of 26 26 - -74~dB to a maximum of +6~dB.}% 27 27 - \opt{gigabeats}{minimum of -90~dB to a maximum of +6~dB.}% 28 28 - \opt{gigabeatf,vibe500}{minimum of -74~dB to a maximum of +6~dB.}% 29 29 - \opt{fuzeplus}{minimum of -100~dB to a maximum of +6~dB.}% 30 30 - \opt{samsungyh}{minimum of -128~dB to a maximum of 0~dB.}% 31 31 - \opt{erosqnative}{minimum of -74~dB (mute) to a maximum of -2~dB.}% 32 32 - \opt{rgnano}{minimum of -80~dB (mute) to a maximum of 0~dB.}% 33 33 - \opt{ipodvideo}{\\Remark: Lowering the volume below -57~dB will also affect the line-out 26 26 + $-74$~dB to a maximum of +6~dB.}% 27 27 + \opt{gigabeats}{minimum of $-90$~dB to a maximum of +6~dB.}% 28 28 + \opt{gigabeatf,vibe500}{minimum of $-74$~dB to a maximum of +6~dB.}% 29 29 + \opt{fuzeplus}{minimum of $-100$~dB to a maximum of +6~dB.}% 30 30 + \opt{samsungyh}{minimum of $-128$~dB to a maximum of 0~dB.}% 31 31 + \opt{erosqnative}{minimum of $-74$~dB (mute) to a maximum of $-2$~dB.}% 32 32 + \opt{rgnano}{minimum of $-80$~dB (mute) to a maximum of 0~dB.}% 33 33 + \opt{ipodvideo}{\\Remark: Lowering the volume below $-57$~dB will also affect the line-out 34 34 and the recording gain.}% 35 35 - \opt{cowond2}{\\Remark: Lowering the volume below -57~dB will also affect the line-out.}% 35 35 + \opt{cowond2}{\\Remark: Lowering the volume below $-57$~dB will also affect the line-out.}% 36 36 \opt{erosqnative}{\note{When the Line Out is used without anything connected to the 37 37 Headphone port, the volume is fixed. The value is user-configurable; see \setting{Volume Limit}, \reference{ref:volume_limit}. 38 38 If the Headphone port is connected, the volume once again uses the normal \setting{Volume} setting, ··· 53 53 sounds are unaltered (flat response). 54 54 \opt{iriverh100,iriverh300}{The minimum setting is 0~dB and the maximum is 24~dB.}% 55 55 \opt{ipodnano,ipodnano2g,ipodcolor,mpiohd200}{% 56 56 - The minimum setting is -6~dB and the maximum is 9~dB.}% 57 57 - \opt{ipodvideo}{The minimum setting is -12~dB and the maximum is 12~dB.}% 56 56 + The minimum setting is $-6$~dB and the maximum is 9~dB.}% 57 57 + \opt{ipodvideo}{The minimum setting is $-12$~dB and the maximum is 12~dB.}% 58 58 \opt{iaudiom3,iaudiom5,iaudiox5,sansa,sansaAMS,iriverh10,iriverh10_5gb,vibe500,fuzeplus% 59 59 - ,samsungyh}{The minimum setting is -24~dB and the maximum is 24~dB.} 59 59 + ,samsungyh}{The minimum setting is $-24$~dB and the maximum is 24~dB.} 60 60 61 61 \opt{ipodvideo}{ 62 62 \section{Bass Cutoff} ··· 73 73 treble sounds are unaltered (flat response). 74 74 \opt{iriverh100,iriverh300}{The minimum setting is 0~dB and the maximum is 6~dB.}% 75 75 \opt{ipodnano,ipodnano2g,ipodcolor,mpiohd200}{% 76 76 - The minimum setting is -6~dB and the maximum is 9~dB.}% 77 77 - \opt{ipodvideo}{The minimum setting is -12~dB and the maximum is 12~dB.}% 76 76 + The minimum setting is $-6$~dB and the maximum is 9~dB.}% 77 77 + \opt{ipodvideo}{The minimum setting is $-12$~dB and the maximum is 12~dB.}% 78 78 \opt{iaudiom3,iaudiom5,iaudiox5,sansa,sansaAMS,iriverh10,iriverh10_5gb,vibe500,fuzeplus% 79 79 - ,samsungyh}{The minimum setting is -24~dB and the maximum is 24~dB.} 79 79 + ,samsungyh}{The minimum setting is $-24$~dB and the maximum is 24~dB.} 80 80 81 81 \opt{ipodvideo}{ 82 82 \section{Treble Cutoff} ··· 587 587 This setting implements a group delay correction and an additional biophonic EQ to 588 588 emphasize to boost bass perception. The \setting{precut} setting provides 589 589 negative overall gain to prevent possible audio distortion due to the EQ 590 590 - gain. The defult precut value is set to -2.5 dB and can be adjust from 0 dB to -4.5 dB. 590 590 + gain. The defult precut value is set to $-2.5$~dB and can be adjust from 0 dB to $-4.5$~dB. 591 591 Note that this effect will stack with any other EQ applied. 592 592 593 593 \section{Auditory Fatigue Reduction} ··· 608 608 important, is the \setting{Threshold}. The threshold is the audio input level 609 609 at which the compressor begins to act. Any level louder than the threshold 610 610 will be compressed to some extent. The maximum amount of compression, or the 611 611 - quietest level at which the compressor will operate, is -24~dB. The default of 611 611 + quietest level at which the compressor will operate, is $-24$~dB. The default of 612 612 Off disables the compressor. 613 613 614 614 The \setting{Makeup Gain} setting has two options: Off and Auto. Off means

+1 -1

manual/configure_rockbox/system_options.tex

··· 252 252 \item [Touchpad Sensitivity. ]This setting controls the amount of pressure needed to 253 253 register a touchpad press. If set to \opt{SANSA_FUZEPLUS_PAD}{\setting{25}}\opt{GIGABEAT_PAD} 254 254 {\setting{High}} the lightest touch will register. If set to \opt{SANSA_FUZEPLUS_PAD} 255 255 - {\setting{-25}}\opt{GIGABEAT_PAD}{\setting{Normal}} a firmer press will be needed to register 255 255 + {\setting{$-25$}}\opt{GIGABEAT_PAD}{\setting{Normal}} a firmer press will be needed to register 256 256 on the touchpad. 257 257 } 258 258 \end{description}

+2 -2

manual/getting_started/installation.tex

··· 1082 1082 1083 1083 \nopt{rgnano}{ 1084 1084 \nopt{iriverh100,iriverh300,mpiohd200}{\item[``File Not Found'']} 1085 1085 - \opt{iriverh100,iriverh300,mpiohd200}{\item[``-1 error'']} 1085 1085 + \opt{iriverh100,iriverh300,mpiohd200}{\item[``$-1$ error'']} 1086 1086 If you receive a 1087 1087 \nopt{iriverh100,iriverh300,mpiohd200,rgnano}{``File Not Found''} 1088 1088 - \opt{iriverh100,iriverh300,mpiohd200}{``-1 error''} 1088 1088 + \opt{iriverh100,iriverh300,mpiohd200}{``$-1$ error''} 1089 1089 from the bootloader, then the bootloader cannot find the Rockbox firmware. 1090 1090 This is usually a result of not extracting the contents of the \fname{.zip} 1091 1091 file to the proper location\nopt{erosqnative}{, and should not happen when Rockbox has been

+2 -2

manual/rockbox_interface/wps.tex

··· 173 173 Between the indicators of the right and left channel there are little dots. 174 174 These dots represent important volume values. In linear mode each dot is a 175 175 10\% mark. In dBFS mode the dots represent the following values (from right 176 176 - to left): 0~dB, {}-3~dB, {}-6~dB, {}-9~dB, {}-12~dB, {}-18~dB, {}-24~dB, {}-30~dB, 177 177 - {}-40~dB, {}-50~dB, {}-60~dB. 176 176 + to left): 0~dB, $-3$~dB, $-6$~dB, $-9$~dB, $-12$~dB, $-18$~dB, $-24$~dB, $-30$~dB, 177 177 + $-40$~dB, $-50$~dB, $-60$~dB. 178 178 \end{description} 179 179 180 180 \subsection{\label{sec:contextmenu}The WPS Context Menu}