A modern Music Player Daemon based on Rockbox open source high quality audio player
libadwaita
audio
rust
zig
deno
mpris
rockbox
mpd
New port: Shanling Q1 native
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
+2843
-15
+2
apps/SOURCES
+2
apps/SOURCES
+6
-2
apps/features.txt
+6
-2
apps/features.txt
···
182
#endif
183
184
/* This should be AUDIOHW_HAVE_FILTER_ROLL_OFF but that is only defined later */
185
-
#if defined(DX50) || defined(HAVE_DF1704_CODEC) || defined(HAVE_PCM1792_CODEC) || defined(HAVE_CS4398) || defined(HAVE_WM8740) || defined(HAVE_ES9018) || defined(HAVE_XDUOO_LINUX_CODEC) || defined(HAVE_FIIO_LINUX_CODEC) || defined(HAVE_AK4376)
186
filter_roll_off
187
#endif
188
189
/* This should be AUDIOHW_HAVE_POWER_MODE but that is not defined yet */
190
-
#if defined(HAVE_AK4376)
191
dac_power_mode
192
#endif
193
194
#if defined(HAVE_ES9018)
195
es9018
196
#endif
197
198
/* These features are only used by the manual so they won't break binary
···
182
#endif
183
184
/* This should be AUDIOHW_HAVE_FILTER_ROLL_OFF but that is only defined later */
185
+
#if defined(DX50) || defined(HAVE_DF1704_CODEC) || defined(HAVE_PCM1792_CODEC) || defined(HAVE_CS4398) || defined(HAVE_WM8740) || defined(HAVE_ES9018) || defined(HAVE_XDUOO_LINUX_CODEC) || defined(HAVE_FIIO_LINUX_CODEC) || defined(HAVE_AK4376) || defined(HAVE_ES9218)
186
filter_roll_off
187
#endif
188
189
/* This should be AUDIOHW_HAVE_POWER_MODE but that is not defined yet */
190
+
#if defined(HAVE_AK4376) || defined(HAVE_ES9218)
191
dac_power_mode
192
#endif
193
194
#if defined(HAVE_ES9018)
195
es9018
196
+
#endif
197
+
198
+
#if defined(HAVE_ES9218)
199
+
es9218
200
#endif
201
202
/* These features are only used by the manual so they won't break binary
+77
apps/keymaps/keymap-shanlingq1.c
+77
apps/keymaps/keymap-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
/* Button Code Definitions for Shanling Q1 target */
23
+
24
+
#include "config.h"
25
+
#include "action.h"
26
+
#include "button.h"
27
+
#include "settings.h"
28
+
29
+
/* {Action Code, Button code, Prereq button code } */
30
+
31
+
static const struct button_mapping button_context_standard[] = {
32
+
{ACTION_STD_PREV, BUTTON_PREV, BUTTON_NONE},
33
+
{ACTION_STD_NEXT, BUTTON_NEXT, BUTTON_NONE},
34
+
{ACTION_STD_OK, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY},
35
+
{ACTION_STD_CANCEL, BUTTON_POWER|BUTTON_REL, BUTTON_POWER},
36
+
LAST_ITEM_IN_LIST
37
+
}; /* button_context_standard */
38
+
39
+
static const struct button_mapping button_context_wps[] = {
40
+
{ACTION_WPS_PLAY, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY},
41
+
{ACTION_WPS_STOP, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_NONE},
42
+
{ACTION_WPS_VOLUP, BUTTON_VOL_UP|BUTTON_REL, BUTTON_NONE},
43
+
{ACTION_WPS_VOLDOWN, BUTTON_VOL_DOWN|BUTTON_REL, BUTTON_NONE},
44
+
{ACTION_WPS_SKIPNEXT, BUTTON_NEXT|BUTTON_REL, BUTTON_NEXT},
45
+
{ACTION_WPS_SKIPPREV, BUTTON_PREV|BUTTON_REL, BUTTON_PREV},
46
+
{ACTION_WPS_SEEKFWD, BUTTON_NEXT|BUTTON_REPEAT, BUTTON_NONE},
47
+
{ACTION_WPS_STOPSEEK, BUTTON_NEXT|BUTTON_REL, BUTTON_NEXT|BUTTON_REPEAT},
48
+
{ACTION_WPS_SEEKBACK, BUTTON_PREV|BUTTON_REPEAT, BUTTON_NONE},
49
+
{ACTION_WPS_STOPSEEK, BUTTON_PREV|BUTTON_REL, BUTTON_PREV|BUTTON_REPEAT},
50
+
{ACTION_STD_KEYLOCK, BUTTON_POWER|BUTTON_REL, BUTTON_POWER},
51
+
LAST_ITEM_IN_LIST
52
+
}; /* button_context_wps */
53
+
54
+
static const struct button_mapping button_context_list[] = {
55
+
{ACTION_LIST_VOLUP, BUTTON_VOL_UP|BUTTON_REL, BUTTON_NONE},
56
+
{ACTION_LIST_VOLDOWN, BUTTON_VOL_DOWN|BUTTON_REL, BUTTON_NONE},
57
+
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
58
+
}; /* button_context_list */
59
+
60
+
const struct button_mapping* target_get_context_mapping(int context)
61
+
{
62
+
switch (context)
63
+
{
64
+
default:
65
+
case CONTEXT_STD:
66
+
return button_context_standard;
67
+
case CONTEXT_WPS:
68
+
return button_context_wps;
69
+
case CONTEXT_TREE:
70
+
case CONTEXT_CUSTOM|CONTEXT_TREE:
71
+
case CONTEXT_MAINMENU:
72
+
case CONTEXT_BOOKMARKSCREEN:
73
+
//return button_context_tree;
74
+
case CONTEXT_LIST:
75
+
return button_context_list;
76
+
}
77
+
}
+145
apps/lang/english.lang
+145
apps/lang/english.lang
···
12205
</voice>
12206
</phrase>
12207
<phrase>
12208
id: LANG_DAC_POWER_MODE
12209
desc: in sound settings
12210
user: core
12211
<source>
12212
*: none
12213
dac_power_mode: "DAC's power mode"
12214
</source>
12215
<dest>
12216
*: none
12217
dac_power_mode: "DAC's power mode"
12218
</dest>
12219
<voice>
12220
*: none
12221
dac_power_mode: "DAC's power mode"
12222
</voice>
12223
</phrase>
12224
<phrase>
···
12228
<source>
12229
*: none
12230
dac_power_mode: "High performance"
12231
</source>
12232
<dest>
12233
*: none
12234
dac_power_mode: "High performance"
12235
</dest>
12236
<voice>
12237
*: none
12238
dac_power_mode: "High performance"
12239
</voice>
12240
</phrase>
12241
<phrase>
···
12245
<source>
12246
*: none
12247
dac_power_mode: "Save battery"
12248
</source>
12249
<dest>
12250
*: none
12251
dac_power_mode: "Save battery"
12252
</dest>
12253
<voice>
12254
*: none
12255
dac_power_mode: "Save battery"
12256
</voice>
12257
</phrase>
12258
<phrase>
···
12205
</voice>
12206
</phrase>
12207
<phrase>
12208
+
id: LANG_FILTER_LINEAR_FAST
12209
+
desc: in sound settings
12210
+
user: core
12211
+
<source>
12212
+
*: none
12213
+
es9218: "Linear Fast"
12214
+
</source>
12215
+
<dest>
12216
+
*: none
12217
+
es9218: "Linear Fast"
12218
+
</dest>
12219
+
<voice>
12220
+
*: none
12221
+
es9218: "Linear Fast"
12222
+
</voice>
12223
+
</phrase>
12224
+
<phrase>
12225
+
id: LANG_FILTER_LINEAR_SLOW
12226
+
desc: in sound settings
12227
+
user: core
12228
+
<source>
12229
+
*: none
12230
+
es9218: "Linear Slow"
12231
+
</source>
12232
+
<dest>
12233
+
*: none
12234
+
es9218: "Linear Slow"
12235
+
</dest>
12236
+
<voice>
12237
+
*: none
12238
+
es9218: "Linear Slow"
12239
+
</voice>
12240
+
</phrase>
12241
+
<phrase>
12242
+
id: LANG_FILTER_MINIMUM_FAST
12243
+
desc: in sound settings
12244
+
user: core
12245
+
<source>
12246
+
*: none
12247
+
es9218: "Minimum Fast"
12248
+
</source>
12249
+
<dest>
12250
+
*: none
12251
+
es9218: "Minimum Fast"
12252
+
</dest>
12253
+
<voice>
12254
+
*: none
12255
+
es9218: "Minimum Fast"
12256
+
</voice>
12257
+
</phrase>
12258
+
<phrase>
12259
+
id: LANG_FILTER_MINIMUM_SLOW
12260
+
desc: in sound settings
12261
+
user: core
12262
+
<source>
12263
+
*: none
12264
+
es9218: "Minimum Slow"
12265
+
</source>
12266
+
<dest>
12267
+
*: none
12268
+
es9218: "Minimum Slow"
12269
+
</dest>
12270
+
<voice>
12271
+
*: none
12272
+
es9218: "Minimum Slow"
12273
+
</voice>
12274
+
</phrase>
12275
+
<phrase>
12276
+
id: LANG_FILTER_APODIZING_1
12277
+
desc: in sound settings
12278
+
user: core
12279
+
<source>
12280
+
*: none
12281
+
es9218: "Apodizing type 1"
12282
+
</source>
12283
+
<dest>
12284
+
*: none
12285
+
es9218: "Apodizing type 1"
12286
+
</dest>
12287
+
<voice>
12288
+
*: none
12289
+
es9218: "Apodizing type 1"
12290
+
</voice>
12291
+
</phrase>
12292
+
<phrase>
12293
+
id: LANG_FILTER_APODIZING_2
12294
+
desc: in sound settings
12295
+
user: core
12296
+
<source>
12297
+
*: none
12298
+
es9218: "Apodizing type 2"
12299
+
</source>
12300
+
<dest>
12301
+
*: none
12302
+
es9218: "Apodizing type 2"
12303
+
</dest>
12304
+
<voice>
12305
+
*: none
12306
+
es9218: "Apodizing type 2"
12307
+
</voice>
12308
+
</phrase>
12309
+
<phrase>
12310
+
id: LANG_FILTER_HYBRID_FAST
12311
+
desc: in sound settings
12312
+
user: core
12313
+
<source>
12314
+
*: none
12315
+
es9218: "Hybrid Fast"
12316
+
</source>
12317
+
<dest>
12318
+
*: none
12319
+
es9218: "Hybrid Fast"
12320
+
</dest>
12321
+
<voice>
12322
+
*: none
12323
+
es9218: "Hybrid Fast"
12324
+
</voice>
12325
+
</phrase>
12326
+
<phrase>
12327
+
id: LANG_FILTER_BRICK_WALL
12328
+
desc: in sound settings
12329
+
user: core
12330
+
<source>
12331
+
*: none
12332
+
es9218: "Brick Wall"
12333
+
</source>
12334
+
<dest>
12335
+
*: none
12336
+
es9218: "Brick Wall"
12337
+
</dest>
12338
+
<voice>
12339
+
*: none
12340
+
es9218: "Brick Wall"
12341
+
</voice>
12342
+
</phrase>
12343
+
<phrase>
12344
id: LANG_DAC_POWER_MODE
12345
desc: in sound settings
12346
user: core
12347
<source>
12348
*: none
12349
dac_power_mode: "DAC's power mode"
12350
+
es9218: "DAC's output level"
12351
</source>
12352
<dest>
12353
*: none
12354
dac_power_mode: "DAC's power mode"
12355
+
es9218: "DAC's output level"
12356
</dest>
12357
<voice>
12358
*: none
12359
dac_power_mode: "DAC's power mode"
12360
+
es9218: "DAC's output level"
12361
</voice>
12362
</phrase>
12363
<phrase>
···
12367
<source>
12368
*: none
12369
dac_power_mode: "High performance"
12370
+
es9218: "High Gain (2 Vrms)"
12371
</source>
12372
<dest>
12373
*: none
12374
dac_power_mode: "High performance"
12375
+
es9218: "High Gain (2 Vrms)"
12376
</dest>
12377
<voice>
12378
*: none
12379
dac_power_mode: "High performance"
12380
+
es9218: "High Gain (2 Vrms)"
12381
</voice>
12382
</phrase>
12383
<phrase>
···
12387
<source>
12388
*: none
12389
dac_power_mode: "Save battery"
12390
+
es9218: "Low Gain (1 Vrms)"
12391
</source>
12392
<dest>
12393
*: none
12394
dac_power_mode: "Save battery"
12395
+
es9218: "Low Gain (1 Vrms)"
12396
</dest>
12397
<voice>
12398
*: none
12399
dac_power_mode: "Save battery"
12400
+
es9218: "Low Gain (1 Vrms)"
12401
</voice>
12402
</phrase>
12403
<phrase>
+3
apps/plugins/battery_bench.c
+3
apps/plugins/battery_bench.c
+2
-1
apps/plugins/bitmaps/mono/SOURCES
+2
-1
apps/plugins/bitmaps/mono/SOURCES
···
19
((LCD_WIDTH == 176) && (LCD_HEIGHT == 220))
20
bubbles_bubble.220x176x1.bmp
21
#elif ((LCD_WIDTH == 320) && (LCD_HEIGHT == 240)) || \
22
-
((LCD_WIDTH == 240) && (LCD_HEIGHT >= 320))
23
bubbles_bubble.320x240x1.bmp
24
#elif ((LCD_WIDTH == 640) && (LCD_HEIGHT == 480)) || \
25
((LCD_WIDTH == 480) && (LCD_HEIGHT == 640))
···
19
((LCD_WIDTH == 176) && (LCD_HEIGHT == 220))
20
bubbles_bubble.220x176x1.bmp
21
#elif ((LCD_WIDTH == 320) && (LCD_HEIGHT == 240)) || \
22
+
((LCD_WIDTH == 240) && (LCD_HEIGHT >= 320)) || \
23
+
((LCD_WIDTH == 360) && (LCD_HEIGHT == 400))
24
bubbles_bubble.320x240x1.bmp
25
#elif ((LCD_WIDTH == 640) && (LCD_HEIGHT == 480)) || \
26
((LCD_WIDTH == 480) && (LCD_HEIGHT == 640))
+20
-2
apps/plugins/bitmaps/native/SOURCES
+20
-2
apps/plugins/bitmaps/native/SOURCES
···
158
((LCD_WIDTH >= 480) && (LCD_HEIGHT >= 640))
159
bubbles_emblem.640x480x16.bmp
160
bubbles_background.640x480x16.bmp
161
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
162
bubbles_emblem.320x240x16.bmp
163
bubbles_background.320x240x16.bmp
···
388
invadrox_ufo.16x7x16.bmp
389
invadrox_ufo_explode.21x8x16.bmp
390
invadrox_numbers.50x7x16.bmp
391
-
#if LCD_WIDTH == 320
392
invadrox_background.320x240x16.bmp
393
#elif LCD_WIDTH == 240
394
invadrox_background.240x320x16.bmp
···
457
jewels.320x240x16.bmp
458
#elif (LCD_WIDTH == 320) && (LCD_HEIGHT == 240)
459
jewels.320x240x16.bmp
460
#elif ((LCD_WIDTH == 640) && (LCD_HEIGHT == 480)) || \
461
((LCD_WIDTH == 480) && (LCD_HEIGHT == 640))
462
jewels.640x480x16.bmp
···
546
#if LCD_DEPTH >= 16 /* colour versions*/
547
#if (LCD_WIDTH == 640) && (LCD_HEIGHT == 480)
548
rockblox_background.640x480x16.bmp
549
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
550
rockblox_background.320x240x16.bmp
551
#elif (LCD_WIDTH == 240) && (LCD_HEIGHT >= 320)
···
603
snake2_left.640x480x16.bmp
604
snake2_right.640x480x16.bmp
605
snake2_bottom.640x480x16.bmp
606
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240) && (LCD_DEPTH >= 16)
607
snake2_header1.320x240x16.bmp
608
snake2_header2.320x240x16.bmp
···
874
#elif (LCD_WIDTH == 320 && LCD_HEIGHT == 240)
875
superdom_boarditems.320x240x16.bmp
876
#elif ((LCD_WIDTH == 240) && (LCD_HEIGHT == 320)) || \
877
-
((LCD_WIDTH == 240) && (LCD_HEIGHT == 400))
878
superdom_boarditems.240x320x16.bmp
879
#elif (LCD_WIDTH == 480 && LCD_HEIGHT == 640)
880
superdom_boarditems.480x640x16.bmp
···
911
sliding_puzzle.176x176x16.bmp
912
#elif SMALLER_DIMENSION <= 240
913
sliding_puzzle.240x240x16.bmp
914
#elif SMALLER_DIMENSION <= 480
915
sliding_puzzle.480x480x16.bmp
916
#endif
···
158
((LCD_WIDTH >= 480) && (LCD_HEIGHT >= 640))
159
bubbles_emblem.640x480x16.bmp
160
bubbles_background.640x480x16.bmp
161
+
#elif (LCD_WIDTH >= 360) && (LCD_HEIGHT >= 400)
162
+
bubbles_emblem.360x400x16.bmp
163
+
bubbles_background.360x400x16.bmp
164
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
165
bubbles_emblem.320x240x16.bmp
166
bubbles_background.320x240x16.bmp
···
391
invadrox_ufo.16x7x16.bmp
392
invadrox_ufo_explode.21x8x16.bmp
393
invadrox_numbers.50x7x16.bmp
394
+
#if LCD_WIDTH == 360 && LCD_HEIGHT == 400
395
+
invadrox_background.360x400x16.bmp
396
+
#elif LCD_WIDTH == 320
397
invadrox_background.320x240x16.bmp
398
#elif LCD_WIDTH == 240
399
invadrox_background.240x320x16.bmp
···
462
jewels.320x240x16.bmp
463
#elif (LCD_WIDTH == 320) && (LCD_HEIGHT == 240)
464
jewels.320x240x16.bmp
465
+
#elif (LCD_WIDTH == 360) && (LCD_HEIGHT == 400)
466
+
jewels.360x400x16.bmp
467
#elif ((LCD_WIDTH == 640) && (LCD_HEIGHT == 480)) || \
468
((LCD_WIDTH == 480) && (LCD_HEIGHT == 640))
469
jewels.640x480x16.bmp
···
553
#if LCD_DEPTH >= 16 /* colour versions*/
554
#if (LCD_WIDTH == 640) && (LCD_HEIGHT == 480)
555
rockblox_background.640x480x16.bmp
556
+
#elif (LCD_WIDTH == 360) && (LCD_HEIGHT == 400)
557
+
rockblox_background.360x400x16.bmp
558
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
559
rockblox_background.320x240x16.bmp
560
#elif (LCD_WIDTH == 240) && (LCD_HEIGHT >= 320)
···
612
snake2_left.640x480x16.bmp
613
snake2_right.640x480x16.bmp
614
snake2_bottom.640x480x16.bmp
615
+
#elif (LCD_WIDTH >= 360) && (LCD_HEIGHT >= 400) && (LCD_DEPTH >= 16)
616
+
snake2_header1.360x400x16.bmp
617
+
snake2_header2.360x400x16.bmp
618
+
snake2_left.360x400x16.bmp
619
+
snake2_right.360x400x16.bmp
620
+
snake2_bottom.360x400x16.bmp
621
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240) && (LCD_DEPTH >= 16)
622
snake2_header1.320x240x16.bmp
623
snake2_header2.320x240x16.bmp
···
889
#elif (LCD_WIDTH == 320 && LCD_HEIGHT == 240)
890
superdom_boarditems.320x240x16.bmp
891
#elif ((LCD_WIDTH == 240) && (LCD_HEIGHT == 320)) || \
892
+
((LCD_WIDTH == 240) && (LCD_HEIGHT == 400)) || \
893
+
((LCD_WIDTH == 360) && (LCD_HEIGHT == 400))
894
superdom_boarditems.240x320x16.bmp
895
#elif (LCD_WIDTH == 480 && LCD_HEIGHT == 640)
896
superdom_boarditems.480x640x16.bmp
···
927
sliding_puzzle.176x176x16.bmp
928
#elif SMALLER_DIMENSION <= 240
929
sliding_puzzle.240x240x16.bmp
930
+
#elif SMALLER_DIMENSION <= 360
931
+
sliding_puzzle.360x360x16.bmp
932
#elif SMALLER_DIMENSION <= 480
933
sliding_puzzle.480x480x16.bmp
934
#endif
apps/plugins/bitmaps/native/bubbles_background.360x400x16.bmp
apps/plugins/bitmaps/native/bubbles_background.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/bubbles_emblem.360x400x16.bmp
apps/plugins/bitmaps/native/bubbles_emblem.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/invadrox_background.360x400x16.bmp
apps/plugins/bitmaps/native/invadrox_background.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/jewels.360x400x16.bmp
apps/plugins/bitmaps/native/jewels.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/rockblox_background.360x400x16.bmp
apps/plugins/bitmaps/native/rockblox_background.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/sliding_puzzle.360x360x16.bmp
apps/plugins/bitmaps/native/sliding_puzzle.360x360x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/snake2_bottom.360x400x16.bmp
apps/plugins/bitmaps/native/snake2_bottom.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/snake2_header1.360x400x16.bmp
apps/plugins/bitmaps/native/snake2_header1.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/snake2_header2.360x400x16.bmp
apps/plugins/bitmaps/native/snake2_header2.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/snake2_left.360x400x16.bmp
apps/plugins/bitmaps/native/snake2_left.360x400x16.bmp
This is a binary file and will not be displayed.
apps/plugins/bitmaps/native/snake2_right.360x400x16.bmp
apps/plugins/bitmaps/native/snake2_right.360x400x16.bmp
This is a binary file and will not be displayed.
+4
apps/plugins/blackjack.c
+4
apps/plugins/blackjack.c
+3
apps/plugins/brickmania.c
+3
apps/plugins/brickmania.c
+11
apps/plugins/bubbles.c
+11
apps/plugins/bubbles.c
···
120
#define XOFS 128
121
#define MAX_FPS 40
122
123
+
#elif (LCD_WIDTH == 360) && (LCD_HEIGHT == 400)
124
+
#define XOFS 86
125
+
#define YOFS 100
126
+
#define SCORE_TXT_X 28
127
+
#define SCORE_TXT_WIDTH 32
128
+
#define SCORE_TXT_Y 48
129
+
#define LEVEL_TXT_X 27
130
+
#define LEVEL_TXT_WIDTH 32
131
+
#define LEVEL_TXT_Y 5
132
+
#define MAX_FPS 40
133
+
134
/* 22x22 bubbles (iPod Video) */
135
#elif (LCD_HEIGHT == 240) && (LCD_WIDTH == 320)
136
#define XOFS 72
+3
apps/plugins/calculator.c
+3
apps/plugins/calculator.c
+3
apps/plugins/calendar.c
+3
apps/plugins/calendar.c
+3
apps/plugins/chessbox/chessbox_pgn.h
+3
apps/plugins/chessbox/chessbox_pgn.h
+3
apps/plugins/chessclock.c
+3
apps/plugins/chessclock.c
+3
apps/plugins/chip8.c
+3
apps/plugins/chip8.c
+3
apps/plugins/clix.c
+3
apps/plugins/clix.c
+3
apps/plugins/cube.c
+3
apps/plugins/cube.c
+4
apps/plugins/doom/i_video.c
+4
apps/plugins/doom/i_video.c
+3
apps/plugins/flipit.c
+3
apps/plugins/flipit.c
+3
apps/plugins/fractals/fractal.h
+3
apps/plugins/fractals/fractal.h
+20
apps/plugins/invadrox.c
+20
apps/plugins/invadrox.c
···
296
#define RIGHT BUTTON_RIGHT
297
#define FIRE BUTTON_SELECT
298
299
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
300
+
/* use touchscreen */
301
+
302
#else
303
#error INVADROX: Unsupported keypad
304
#endif
···
651
#define LIVES_X 8
652
#define MAX_Y 15
653
654
+
#elif (LCD_WIDTH == 360) && (LCD_HEIGHT == 400)
655
+
656
+
/* Shanling Q1
657
+
*/
658
+
#define ARCADISH_GRAPHICS
659
+
#define PLAYFIELD_X 32
660
+
#define SHIP_Y (PLAYFIELD_Y - 3 * SHIP_HEIGHT)
661
+
#define ALIEN_START_Y (UFO_Y + 3 * ALIEN_HEIGHT)
662
+
/* Redefine SCORE_Y */
663
+
#undef SCORE_Y
664
+
#define SCORE_Y 80
665
+
#define SCORENUM_X (PLAYFIELD_X + NUMBERS_WIDTH)
666
+
#define SCORENUM_Y SCORE_Y + (2 * (FONT_HEIGHT + 1) + 1)
667
+
#define HISCORENUM_X (LCD_WIDTH - PLAYFIELD_X - 1 - 6 * NUMBERS_WIDTH - 5 * NUM_SPACING)
668
+
#define SHIELD_Y (PLAYFIELD_Y - 6 * SHIP_HEIGHT)
669
+
#define LIVES_X 10
670
+
#define MAX_Y 18
671
672
#else
673
#error INVADROX: Unsupported LCD type
+3
apps/plugins/jewels.c
+3
apps/plugins/jewels.c
+11
-1
apps/plugins/lib/keymaps.h
+11
-1
apps/plugins/lib/keymaps.h
···
255
#define BTN_FIRE BUTTON_SELECT
256
#define BTN_PAUSE BUTTON_POWER
257
258
#else
259
#error Unsupported keypad
260
#endif
···
272
#elif (CONFIG_KEYPAD != COWON_D2_PAD) && \
273
(CONFIG_KEYPAD != DX50_PAD) && \
274
(CONFIG_KEYPAD != ONDAVX777_PAD) && \
275
-
(CONFIG_KEYPAD != CREATIVE_ZENXFI2_PAD)
276
#define BTN_FIRE BUTTON_BOTTOMLEFT
277
#define BTN_PAUSE BUTTON_TOPLEFT
278
#endif
···
255
#define BTN_FIRE BUTTON_SELECT
256
#define BTN_PAUSE BUTTON_POWER
257
258
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
259
+
#define BTN_FIRE BUTTON_CENTER
260
+
#define BTN_PAUSE BUTTON_POWER
261
+
#define BTN_HAVE_DIAGONAL
262
+
#define BTN_DOWN_LEFT BUTTON_BOTTOMLEFT
263
+
#define BTN_DOWN_RIGHT BUTTON_BOTTOMRIGHT
264
+
#define BTN_UP_LEFT BUTTON_TOPLEFT
265
+
#define BTN_UP_RIGHT BUTTON_TOPRIGHT
266
+
267
#else
268
#error Unsupported keypad
269
#endif
···
281
#elif (CONFIG_KEYPAD != COWON_D2_PAD) && \
282
(CONFIG_KEYPAD != DX50_PAD) && \
283
(CONFIG_KEYPAD != ONDAVX777_PAD) && \
284
+
(CONFIG_KEYPAD != CREATIVE_ZENXFI2_PAD) && \
285
+
(CONFIG_KEYPAD != SHANLING_Q1_PAD)
286
#define BTN_FIRE BUTTON_BOTTOMLEFT
287
#define BTN_PAUSE BUTTON_TOPLEFT
288
#endif
+2
apps/plugins/lib/pluginlib_actions.c
+2
apps/plugins/lib/pluginlib_actions.c
···
499
{PLA_SELECT, BUTTON_SELECT, BUTTON_NONE},
500
{PLA_SELECT_REL, BUTTON_SELECT|BUTTON_REL, BUTTON_SELECT},
501
{PLA_SELECT_REPEAT, BUTTON_SELECT|BUTTON_REPEAT, BUTTON_NONE},
502
+
#elif (CONFIG_KEYPAD == SHANLING_Q1_PAD)
503
+
{PLA_EXIT, BUTTON_POWER, BUTTON_NONE},
504
#else
505
# ifndef HAVE_TOUCHSCREEN
506
# error pluginlib_actions: No actions defined
+3
apps/plugins/midi/midiplay.c
+3
apps/plugins/midi/midiplay.c
+3
apps/plugins/minesweeper.c
+3
apps/plugins/minesweeper.c
+3
apps/plugins/mp3_encoder.c
+3
apps/plugins/mp3_encoder.c
+3
apps/plugins/mpegplayer/mpeg_settings.c
+3
apps/plugins/mpegplayer/mpeg_settings.c
+3
apps/plugins/mpegplayer/mpegplayer.c
+3
apps/plugins/mpegplayer/mpegplayer.c
+3
apps/plugins/oscilloscope.c
+3
apps/plugins/oscilloscope.c
+10
apps/plugins/pacbox/pacbox.h
+10
apps/plugins/pacbox/pacbox.h
···
398
#define PACMAN_1UP BUTTON_VOL_UP
399
#define PACMAN_COIN BUTTON_PLAY
400
401
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
402
+
#define PACMAN_UP BUTTON_TOPMIDDLE
403
+
#define PACMAN_DOWN BUTTON_BOTTOMMIDDLE
404
+
#define PACMAN_LEFT BUTTON_MIDLEFT
405
+
#define PACMAN_RIGHT BUTTON_MIDRIGHT
406
+
#define PACMAN_MENU BUTTON_TOPLEFT
407
+
#define PACMAN_1UP BUTTON_BOTTOMLEFT
408
+
#define PACMAN_2UP BUTTON_BOTTOMRIGHT
409
+
#define PACMAN_COIN BUTTON_CENTER
410
+
411
#else
412
413
#error Keymap not defined!
+3
apps/plugins/pegbox.c
+3
apps/plugins/pegbox.c
+3
apps/plugins/pong.c
+3
apps/plugins/pong.c
+3
apps/plugins/reversi/reversi-gui.h
+3
apps/plugins/reversi/reversi-gui.h
+19
apps/plugins/rockblox.c
+19
apps/plugins/rockblox.c
···
465
#define ROCKBLOX_DROP BUTTON_PLAY
466
#define ROCKBLOX_RESTART BUTTON_BACK
467
468
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
469
+
/* use touchscreen */
470
+
471
#else
472
#error No keymap defined!
473
#endif
···
536
#define SCORE_Y 58
537
#define LEVEL_Y 142
538
#define LINES_Y 218
539
+
540
+
#elif (LCD_WIDTH == 360) && (LCD_HEIGHT == 400)
541
+
542
+
#define BLOCK_WIDTH 19
543
+
#define BLOCK_HEIGHT 19
544
+
#define BOARD_X 27
545
+
#define BOARD_Y 0
546
+
#define LABEL_X 258
547
+
#define SCORE_Y 40
548
+
#define LEVEL_Y 92
549
+
#define LINES_Y 140
550
+
#define HIGH_LABEL_X 258
551
+
#define HIGH_SCORE_Y 200
552
+
#define HIGH_LEVEL_Y 258
553
+
#define PREVIEW_X 258
554
+
#define PREVIEW_Y 300
555
556
#elif (LCD_WIDTH == 320) && (LCD_HEIGHT == 240)
557
+3
apps/plugins/rockboy/rockboy.c
+3
apps/plugins/rockboy/rockboy.c
+3
apps/plugins/rockpaint.c
+3
apps/plugins/rockpaint.c
+3
apps/plugins/sliding_puzzle.c
+3
apps/plugins/sliding_puzzle.c
+3
apps/plugins/snake.c
+3
apps/plugins/snake.c
+15
apps/plugins/snake2.c
+15
apps/plugins/snake2.c
···
62
#define TOP_X4 548 /* x-coord of the lowerright item (hi-score) */
63
#define TOP_Y1 8 /* y-coord of the top row of items */
64
#define TOP_Y2 50 /* y-coord of the bottom row of items */
65
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
66
#define MULTIPLIER 10 /*Modifier for porting on other screens*/
67
#define MODIFIER_1 10
···
445
#define SNAKE2_QUIT BUTTON_POWER
446
#define SNAKE2_PLAYPAUSE BUTTON_PLAY
447
#define SNAKE2_PLAYPAUSE_TEXT "PLAY"
448
449
#else
450
#error No keymap defined!
···
62
#define TOP_X4 548 /* x-coord of the lowerright item (hi-score) */
63
#define TOP_Y1 8 /* y-coord of the top row of items */
64
#define TOP_Y2 50 /* y-coord of the bottom row of items */
65
+
#elif (LCD_WIDTH >= 360) && (LCD_HEIGHT >= 400)
66
+
#define MULTIPLIER 12 /*Modifier for porting on other screens*/
67
+
#define MODIFIER_1 12
68
+
#define MODIFIER_2 10
69
+
#define CENTER_X 12
70
+
#define CENTER_Y 40
71
+
#define TOP_X1 34 /* x-coord of the upperleft item (game type) */
72
+
#define TOP_X2 320 /* x-coord of the upperright item (maze type) */
73
+
#define TOP_X3 42 /* x-coord of the lowerleft item (speed) */
74
+
#define TOP_X4 314 /* x-coord of the lowerright item (hi-score) */
75
+
#define TOP_Y1 4 /* y-coord of the top row of items */
76
+
#define TOP_Y2 25 /* y-coord of the bottom row of items */
77
#elif (LCD_WIDTH >= 320) && (LCD_HEIGHT >= 240)
78
#define MULTIPLIER 10 /*Modifier for porting on other screens*/
79
#define MODIFIER_1 10
···
457
#define SNAKE2_QUIT BUTTON_POWER
458
#define SNAKE2_PLAYPAUSE BUTTON_PLAY
459
#define SNAKE2_PLAYPAUSE_TEXT "PLAY"
460
+
461
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
462
+
/* use touchscreen */
463
464
#else
465
#error No keymap defined!
+3
apps/plugins/sokoban.c
+3
apps/plugins/sokoban.c
+3
apps/plugins/solitaire.c
+3
apps/plugins/solitaire.c
+3
apps/plugins/spacerocks.c
+3
apps/plugins/spacerocks.c
+4
apps/plugins/star.c
+4
apps/plugins/star.c
+1
-1
apps/plugins/stopwatch.lua
+1
-1
apps/plugins/stopwatch.lua
+3
apps/plugins/sudoku/sudoku.h
+3
apps/plugins/sudoku/sudoku.h
+5
apps/plugins/test_touchscreen.c
+5
apps/plugins/test_touchscreen.c
···
37
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI2_PAD
38
#define TOUCHSCREEN_QUIT BUTTON_POWER
39
#define TOUCHSCREEN_TOGGLE BUTTON_MENU
40
#elif (CONFIG_KEYPAD == ANDROID_PAD)
41
#define TOUCHSCREEN_QUIT BUTTON_BACK
42
#define TOUCHSCREEN_TOGGLE BUTTON_MENU
43
#elif (CONFIG_KEYPAD == SDL_PAD)
44
#define TOUCHSCREEN_QUIT BUTTON_MIDLEFT
45
#define TOUCHSCREEN_TOGGLE BUTTON_CENTER
46
#endif
47
48
/* plugin entry point */
···
37
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI2_PAD
38
#define TOUCHSCREEN_QUIT BUTTON_POWER
39
#define TOUCHSCREEN_TOGGLE BUTTON_MENU
40
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
41
+
#define TOUCHSCREEN_QUIT BUTTON_POWER
42
+
#define TOUCHSCREEN_TOGGLE BUTTON_PLAY
43
#elif (CONFIG_KEYPAD == ANDROID_PAD)
44
#define TOUCHSCREEN_QUIT BUTTON_BACK
45
#define TOUCHSCREEN_TOGGLE BUTTON_MENU
46
#elif (CONFIG_KEYPAD == SDL_PAD)
47
#define TOUCHSCREEN_QUIT BUTTON_MIDLEFT
48
#define TOUCHSCREEN_TOGGLE BUTTON_CENTER
49
+
#else
50
+
# error "No keymap defined!"
51
#endif
52
53
/* plugin entry point */
+3
apps/plugins/vu_meter.c
+3
apps/plugins/vu_meter.c
+5
-1
apps/plugins/wormlet.c
+5
-1
apps/plugins/wormlet.c
···
407
#define BTN_QUIT BUTTON_POWER
408
#define BTN_STOPRESET BUTTON_BACK
409
410
#else
411
#error No keymap defined!
412
#endif
···
492
#define SPEED 4
493
#define MAX_WORM_SEGMENTS 512
494
#elif ((LCD_WIDTH == 320) && (LCD_HEIGHT == 240)) || \
495
-
((LCD_WIDTH == 240) && ((LCD_HEIGHT == 320) || (LCD_HEIGHT == 400)))
496
#define FOOD_SIZE 7
497
#define ARGH_SIZE 8
498
#define SPEED 4
···
407
#define BTN_QUIT BUTTON_POWER
408
#define BTN_STOPRESET BUTTON_BACK
409
410
+
#elif CONFIG_KEYPAD == SHANLING_Q1_PAD
411
+
/* use touchscreen */
412
+
413
#else
414
#error No keymap defined!
415
#endif
···
495
#define SPEED 4
496
#define MAX_WORM_SEGMENTS 512
497
#elif ((LCD_WIDTH == 320) && (LCD_HEIGHT == 240)) || \
498
+
((LCD_WIDTH == 240) && ((LCD_HEIGHT == 320) || (LCD_HEIGHT == 400))) || \
499
+
((LCD_WIDTH == 360) && (LCD_HEIGHT == 400))
500
#define FOOD_SIZE 7
501
#define ARGH_SIZE 8
502
#define SPEED 4
+3
apps/plugins/xobox.c
+3
apps/plugins/xobox.c
+3
apps/plugins/zxbox/keymaps.h
+3
apps/plugins/zxbox/keymaps.h
+9
-2
apps/settings_list.c
+9
-2
apps/settings_list.c
···
242
#define DEFAULT_FONT_HEIGHT 12
243
#elif LCD_HEIGHT <= 320
244
#define DEFAULT_FONT_HEIGHT 15
245
#elif LCD_HEIGHT <= 400
246
#define DEFAULT_FONT_HEIGHT 16
247
#elif LCD_HEIGHT <= 480 && LCD_WIDTH < 800
···
261
#endif
262
263
#ifdef HAVE_LCD_COLOR
264
-
#if DEFAULT_FONT_HEIGHT >= 31
265
#define DEFAULT_ICONSET "tango_icons.32x32"
266
#define DEFAULT_VIEWERS_ICONSET "tango_icons_viewers.32x32"
267
#elif DEFAULT_FONT_HEIGHT >= 23
···
848
849
#ifdef AUDIOHW_HAVE_FILTER_ROLL_OFF
850
CHOICE_SETTING(F_SOUNDSETTING, roll_off, LANG_FILTER_ROLL_OFF, 0,
851
-
#if defined(AUDIOHW_HAVE_SHORT2_ROLL_OFF)
852
"roll_off", "sharp,slow,short sharp,short slow", sound_set_filter_roll_off,
853
4, ID2P(LANG_FILTER_SHARP), ID2P(LANG_FILTER_SLOW), ID2P(LANG_FILTER_SHORT_SHARP), ID2P(LANG_FILTER_SHORT_SLOW)),
854
#elif defined(AUDIOHW_HAVE_SHORT_ROLL_OFF)
···
242
#define DEFAULT_FONT_HEIGHT 12
243
#elif LCD_HEIGHT <= 320
244
#define DEFAULT_FONT_HEIGHT 15
245
+
#elif defined(SHANLING_Q1)
246
+
/* 16pt font looks pretty aliased & ugly */
247
+
#define DEFAULT_FONT_HEIGHT 18
248
#elif LCD_HEIGHT <= 400
249
#define DEFAULT_FONT_HEIGHT 16
250
#elif LCD_HEIGHT <= 480 && LCD_WIDTH < 800
···
264
#endif
265
266
#ifdef HAVE_LCD_COLOR
267
+
#if DEFAULT_FONT_HEIGHT >= 31 || defined(SHANLING_Q1)
268
#define DEFAULT_ICONSET "tango_icons.32x32"
269
#define DEFAULT_VIEWERS_ICONSET "tango_icons_viewers.32x32"
270
#elif DEFAULT_FONT_HEIGHT >= 23
···
851
852
#ifdef AUDIOHW_HAVE_FILTER_ROLL_OFF
853
CHOICE_SETTING(F_SOUNDSETTING, roll_off, LANG_FILTER_ROLL_OFF, 0,
854
+
#if defined(AUDIOHW_HAVE_ES9218_ROLL_OFF)
855
+
"roll_off", "linear fast,linear slow,minimum fast,minimum slow,apodizing 1,apodizing 2,hybrid fast,brick wall", sound_set_filter_roll_off,
856
+
8, ID2P(LANG_FILTER_LINEAR_FAST), ID2P(LANG_FILTER_LINEAR_SLOW), ID2P(LANG_FILTER_MINIMUM_FAST), ID2P(LANG_FILTER_MINIMUM_SLOW),
857
+
ID2P(LANG_FILTER_APODIZING_1), ID2P(LANG_FILTER_APODIZING_2), ID2P(LANG_FILTER_HYBRID_FAST), ID2P(LANG_FILTER_BRICK_WALL)),
858
+
#elif defined(AUDIOHW_HAVE_SHORT2_ROLL_OFF)
859
"roll_off", "sharp,slow,short sharp,short slow", sound_set_filter_roll_off,
860
4, ID2P(LANG_FILTER_SHARP), ID2P(LANG_FILTER_SLOW), ID2P(LANG_FILTER_SHORT_SHARP), ID2P(LANG_FILTER_SHORT_SLOW)),
861
#elif defined(AUDIOHW_HAVE_SHORT_ROLL_OFF)
backdrops/cabbiev2.360x400x16.bmp
backdrops/cabbiev2.360x400x16.bmp
This is a binary file and will not be displayed.
+1
-1
bootloader/SOURCES
+1
-1
bootloader/SOURCES
+11
bootloader/x1000.c
+11
bootloader/x1000.c
···
66
# define BL_SELECT_NAME "PLAY"
67
# define BL_QUIT_NAME "POWER"
68
# define BOOTBACKUP_FILE "/fiiom3k-boot.bin"
69
+
#elif defined(SHANLING_Q1)
70
+
# define BL_RECOVERY BUTTON_NEXT
71
+
# define BL_UP BUTTON_PREV
72
+
# define BL_DOWN BUTTON_NEXT
73
+
# define BL_SELECT BUTTON_PLAY
74
+
# define BL_QUIT BUTTON_POWER
75
+
# define BL_UP_NAME "PREV"
76
+
# define BL_DOWN_NAME "NEXT"
77
+
# define BL_SELECT_NAME "PLAY"
78
+
# define BL_QUIT_NAME "POWER"
79
+
# define BOOTBACKUP_FILE "/shanlingq1-boot.bin"
80
#else
81
# error "Missing keymap!"
82
#endif
+1
docs/CREDITS
+1
docs/CREDITS
+14
firmware/SOURCES
+14
firmware/SOURCES
···
503
drivers/audio/cs4398.c
504
#elif defined (HAVE_ES9018)
505
drivers/audio/es9018.c
506
#endif /* defined(HAVE_*) */
507
#else /* PLATFORM_HOSTED */
508
#if defined(SAMSUNG_YPR0) && defined(HAVE_AS3514)
···
1716
target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
1717
#endif /* FIIO_M3K */
1718
1719
#if defined(LYRE_PROTO1)
1720
target/arm/at91sam/lyre_proto1/adc-lyre_proto1.c
1721
target/arm/at91sam/lyre_proto1/backlight-lyre_proto1.c
···
1947
#endif
1948
#ifdef HAVE_FT6x06
1949
drivers/ft6x06.c
1950
#endif
1951
#endif
1952
···
503
drivers/audio/cs4398.c
504
#elif defined (HAVE_ES9018)
505
drivers/audio/es9018.c
506
+
#elif defined (HAVE_ES9218)
507
+
drivers/audio/es9218.c
508
#endif /* defined(HAVE_*) */
509
#else /* PLATFORM_HOSTED */
510
#if defined(SAMSUNG_YPR0) && defined(HAVE_AS3514)
···
1718
target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
1719
#endif /* FIIO_M3K */
1720
1721
+
#if defined(SHANLING_Q1)
1722
+
target/mips/ingenic_x1000/shanlingq1/audiohw-shanlingq1.c
1723
+
target/mips/ingenic_x1000/shanlingq1/backlight-shanlingq1.c
1724
+
target/mips/ingenic_x1000/shanlingq1/button-shanlingq1.c
1725
+
target/mips/ingenic_x1000/shanlingq1/lcd-shanlingq1.c
1726
+
target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
1727
+
target/mips/ingenic_x1000/shanlingq1/spl-shanlingq1.c
1728
+
#endif /* SHANLING_Q1 */
1729
+
1730
#if defined(LYRE_PROTO1)
1731
target/arm/at91sam/lyre_proto1/adc-lyre_proto1.c
1732
target/arm/at91sam/lyre_proto1/backlight-lyre_proto1.c
···
1958
#endif
1959
#ifdef HAVE_FT6x06
1960
drivers/ft6x06.c
1961
+
#endif
1962
+
#ifdef HAVE_CW2015
1963
+
drivers/cw2015.c
1964
#endif
1965
#endif
1966
+226
firmware/drivers/audio/es9218.c
+226
firmware/drivers/audio/es9218.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "audiohw.h"
23
+
#include "system.h"
24
+
#include "i2c-async.h"
25
+
26
+
struct es9218_state {
27
+
enum es9218_clock_gear clk_gear;
28
+
uint32_t fsr;
29
+
uint32_t nco;
30
+
};
31
+
32
+
static struct es9218_state es9218;
33
+
34
+
void es9218_open(void)
35
+
{
36
+
/* Enable power supply */
37
+
es9218_set_power_pin(1);
38
+
39
+
/* "Wiggle" reset pin to get the internal oscillator to stabilize.
40
+
* This should also work if using an external powered oscillator,
41
+
* although in that case it's unnecessary to do this dance. */
42
+
es9218_set_reset_pin(1);
43
+
udelay(75);
44
+
es9218_set_reset_pin(0);
45
+
udelay(50);
46
+
es9218_set_reset_pin(1);
47
+
mdelay(2);
48
+
49
+
/* Initialize driver state */
50
+
es9218.clk_gear = ES9218_CLK_GEAR_1;
51
+
es9218.fsr = 0;
52
+
es9218.nco = 0;
53
+
}
54
+
55
+
void es9218_close(void)
56
+
{
57
+
/* Turn off power supply */
58
+
es9218_set_power_pin(0);
59
+
es9218_set_reset_pin(0);
60
+
}
61
+
62
+
static void recalc_nco(void)
63
+
{
64
+
/* nco * CLK *
65
+
* fsr = --------- *
66
+
* 2**32 */
67
+
68
+
uint32_t clk = es9218_get_mclk();
69
+
clk >>= (int)es9218.clk_gear;
70
+
71
+
uint64_t nco64 = es9218.fsr;
72
+
nco64 <<= 32;
73
+
nco64 /= clk;
74
+
75
+
/* let's just ignore overflow... */
76
+
uint32_t nco = nco64;
77
+
if(nco != es9218.nco) {
78
+
es9218.nco = nco;
79
+
80
+
/* registers must be written in this order */
81
+
es9218_write(ES9218_REG_PROG_NCO_BIT0_7, (nco >> 0) & 0xff);
82
+
es9218_write(ES9218_REG_PROG_NCO_BIT8_15, (nco >> 8) & 0xff);
83
+
es9218_write(ES9218_REG_PROG_NCO_BIT16_23, (nco >> 16) & 0xff);
84
+
es9218_write(ES9218_REG_PROG_NCO_BIT24_31, (nco >> 24) & 0xff);
85
+
}
86
+
}
87
+
88
+
void es9218_set_clock_gear(enum es9218_clock_gear gear)
89
+
{
90
+
if(gear != es9218.clk_gear) {
91
+
es9218.clk_gear = gear;
92
+
es9218_update(ES9218_REG_SYSTEM, 0x0c, (uint8_t)(gear & 3) << 2);
93
+
recalc_nco();
94
+
}
95
+
}
96
+
97
+
void es9218_set_nco_frequency(uint32_t fsr)
98
+
{
99
+
if(fsr != es9218.fsr) {
100
+
es9218.fsr = fsr;
101
+
recalc_nco();
102
+
}
103
+
}
104
+
105
+
void es9218_recompute_nco(void)
106
+
{
107
+
recalc_nco();
108
+
}
109
+
110
+
void es9218_set_amp_mode(enum es9218_amp_mode mode)
111
+
{
112
+
es9218_update(ES9218_REG_AMP_CONFIG, 0x03, (uint8_t)mode & 3);
113
+
}
114
+
115
+
void es9218_set_amp_powered(bool en)
116
+
{
117
+
/* this doesn't seem to be necessary..? */
118
+
es9218_update(ES9218_REG_ANALOG_CTRL, 0x40, en ? 0x40 : 0x00);
119
+
}
120
+
121
+
void es9218_set_iface_role(enum es9218_iface_role role)
122
+
{
123
+
/* asrc is used to lock onto the incoming audio frequency and is
124
+
* only used in aysnchronous slave mode. In synchronous operation,
125
+
* including master mode, it can be disabled to save power. */
126
+
int asrc_en = (role == ES9218_IFACE_ROLE_SLAVE ? 1 : 0);
127
+
int master_mode = (role == ES9218_IFACE_ROLE_MASTER ? 1 : 0);
128
+
129
+
es9218_update(ES9218_REG_MASTER_MODE_CONFIG, 1 << 7, master_mode << 7);
130
+
es9218_update(ES9218_REG_GENERAL_CONFIG, 1 << 7, asrc_en << 7);
131
+
}
132
+
133
+
void es9218_set_iface_format(enum es9218_iface_format fmt,
134
+
enum es9218_iface_bits bits)
135
+
{
136
+
uint8_t val = 0;
137
+
val |= ((uint8_t)bits & 3) << 6;
138
+
val |= ((uint8_t)fmt & 3) << 4;
139
+
/* keep low 4 bits zero -> use normal I2S mode, disable DSD mode */
140
+
es9218_write(ES9218_REG_INPUT_SEL, val);
141
+
}
142
+
143
+
static int dig_vol_to_hw(int x)
144
+
{
145
+
x = MIN(x, ES9218_DIG_VOLUME_MAX);
146
+
x = MAX(x, ES9218_DIG_VOLUME_MIN);
147
+
return 0xff - (x - ES9218_DIG_VOLUME_MIN) / ES9218_DIG_VOLUME_STEP;
148
+
}
149
+
150
+
static int amp_vol_to_hw(int x)
151
+
{
152
+
x = MIN(x, ES9218_AMP_VOLUME_MAX);
153
+
x = MAX(x, ES9218_AMP_VOLUME_MIN);
154
+
return 24 - (x - ES9218_AMP_VOLUME_MIN) / ES9218_AMP_VOLUME_STEP;
155
+
}
156
+
157
+
void es9218_set_dig_volume(int vol_l, int vol_r)
158
+
{
159
+
es9218_write(ES9218_REG_VOLUME_LEFT, dig_vol_to_hw(vol_l));
160
+
es9218_write(ES9218_REG_VOLUME_RIGHT, dig_vol_to_hw(vol_r));
161
+
}
162
+
163
+
void es9218_set_amp_volume(int vol)
164
+
{
165
+
es9218_update(ES9218_REG_ANALOG_VOL, 0x1f, amp_vol_to_hw(vol));
166
+
}
167
+
168
+
void es9218_mute(bool en)
169
+
{
170
+
es9218_update(ES9218_REG_FILTER_SYS_MUTE, 1, en ? 1 : 0);
171
+
}
172
+
173
+
void es9218_set_filter(enum es9218_filter_type filt)
174
+
{
175
+
es9218_update(ES9218_REG_FILTER_SYS_MUTE, 0xe0, ((int)filt & 7) << 5);
176
+
}
177
+
178
+
void es9218_set_automute_time(int time)
179
+
{
180
+
if(time < 0) time = 0;
181
+
if(time > 255) time = 255;
182
+
es9218_write(ES9218_REG_AUTOMUTE_TIME, time);
183
+
}
184
+
185
+
void es9218_set_automute_level(int dB)
186
+
{
187
+
es9218_update(ES9218_REG_AUTOMUTE_LEVEL, 0x7f, dB);
188
+
}
189
+
190
+
void es9218_set_automute_fast_mode(bool en)
191
+
{
192
+
es9218_update(ES9218_REG_MIX_AUTOMUTE, 0x10, en ? 0x10 : 0x00);
193
+
}
194
+
195
+
void es9218_set_dpll_bandwidth(int knob)
196
+
{
197
+
es9218_update(ES9218_REG_ASRC_DPLL_BANDWIDTH, 0xf0, (knob & 0xf) << 4);
198
+
}
199
+
200
+
void es9218_set_thd_compensation(bool en)
201
+
{
202
+
es9218_update(ES9218_REG_THD_COMP_BYPASS, 0x40, en ? 0x40 : 0);
203
+
}
204
+
205
+
void es9218_set_thd_coeffs(uint16_t c2, uint16_t c3)
206
+
{
207
+
es9218_write(ES9218_REG_THD_COMP_C2_LO, c2 & 0xff);
208
+
es9218_write(ES9218_REG_THD_COMP_C2_HI, (c2 >> 8) & 0xff);
209
+
es9218_write(ES9218_REG_THD_COMP_C3_LO, c3 & 0xff);
210
+
es9218_write(ES9218_REG_THD_COMP_C3_HI, (c3 >> 8) & 0xff);
211
+
}
212
+
213
+
int es9218_read(int reg)
214
+
{
215
+
return i2c_reg_read1(ES9218_BUS, ES9218_ADDR, reg);
216
+
}
217
+
218
+
void es9218_write(int reg, uint8_t val)
219
+
{
220
+
i2c_reg_write1(ES9218_BUS, ES9218_ADDR, reg, val);
221
+
}
222
+
223
+
void es9218_update(int reg, uint8_t msk, uint8_t val)
224
+
{
225
+
i2c_reg_modify1(ES9218_BUS, ES9218_ADDR, reg, msk, val, NULL);
226
+
}
+191
firmware/drivers/cw2015.c
+191
firmware/drivers/cw2015.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "cw2015.h"
23
+
#include "i2c-async.h"
24
+
#include <string.h>
25
+
#include "system.h"
26
+
27
+
/* Headers for the debug menu */
28
+
#ifndef BOOTLOADER
29
+
# include "action.h"
30
+
# include "list.h"
31
+
# include <stdio.h>
32
+
#endif
33
+
34
+
/* Battery profile info is an opaque blob. According to this,
35
+
* https://lore.kernel.org/linux-pm/20200503154855.duwj2djgqfiyleq5@earth.universe/T/#u
36
+
* the blob only comes from Cellwise testing a physical battery and cannot be
37
+
* obtained any other way. It's specific to a given battery so each target has
38
+
* its own profile.
39
+
*
40
+
* Profile data seems to be retained on the chip so it's not a hard requirement
41
+
* to define this. Provided you don't lose power in the meantime, it should be
42
+
* enough to just boot the OF, then boot Rockbox and read out the battery info
43
+
* from the CW2015 debug screen.
44
+
*/
45
+
#if defined(SHANLING_Q1)
46
+
static const uint8_t device_batinfo[CW2015_SIZE_BATINFO] = {
47
+
0x15, 0x7E, 0x61, 0x59, 0x57, 0x55, 0x56, 0x4C,
48
+
0x4E, 0x4D, 0x50, 0x4C, 0x45, 0x3A, 0x2D, 0x27,
49
+
0x22, 0x1E, 0x19, 0x1E, 0x2A, 0x3C, 0x48, 0x45,
50
+
0x1D, 0x94, 0x08, 0xF6, 0x15, 0x29, 0x48, 0x51,
51
+
0x5D, 0x60, 0x63, 0x66, 0x45, 0x1D, 0x83, 0x38,
52
+
0x09, 0x43, 0x16, 0x42, 0x76, 0x98, 0xA5, 0x1B,
53
+
0x41, 0x76, 0x99, 0xBF, 0x80, 0xC0, 0xEF, 0xCB,
54
+
0x2F, 0x00, 0x64, 0xA5, 0xB5, 0x0E, 0x30, 0x29,
55
+
};
56
+
#else
57
+
# define NO_BATINFO
58
+
#endif
59
+
60
+
static uint8_t chip_batinfo[CW2015_SIZE_BATINFO];
61
+
62
+
/* TODO: Finish implementing this
63
+
*
64
+
* Although this chip might give a better battery estimate than voltage does,
65
+
* the mainline linux driver has a lot of weird hacks due to oddities like the
66
+
* SoC getting stuck during charging, and from limited testing it seems this
67
+
* may occur for the Q1 too.
68
+
*/
69
+
70
+
static int cw2015_read_bat_info(uint8_t* data)
71
+
{
72
+
for(int i = 0; i < CW2015_SIZE_BATINFO; ++i) {
73
+
int r = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_BATINFO + i);
74
+
if(r < 0)
75
+
return r;
76
+
77
+
data[i] = r & 0xff;
78
+
}
79
+
80
+
return 0;
81
+
}
82
+
83
+
void cw2015_init(void)
84
+
{
85
+
/* mdelay(100); */
86
+
int rc = cw2015_read_bat_info(&chip_batinfo[0]);
87
+
if(rc < 0)
88
+
memset(chip_batinfo, 0, sizeof(chip_batinfo));
89
+
}
90
+
91
+
int cw2015_get_vcell(void)
92
+
{
93
+
int vcell_msb = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_VCELL);
94
+
int vcell_lsb = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_VCELL+1);
95
+
96
+
if(vcell_msb < 0 || vcell_lsb < 0)
97
+
return -1;
98
+
99
+
/* 14 bits, resolution 305 uV */
100
+
int v_raw = ((vcell_msb & 0x3f) << 8) | vcell_lsb;
101
+
return v_raw * 61 / 200;
102
+
}
103
+
104
+
int cw2015_get_soc(void)
105
+
{
106
+
int soc_msb = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_SOC);
107
+
108
+
if(soc_msb < 0)
109
+
return -1;
110
+
111
+
/* MSB is the state of charge in percentage.
112
+
* the LSB contains fractional information not useful to Rockbox. */
113
+
return soc_msb & 0xff;
114
+
}
115
+
116
+
int cw2015_get_rrt(void)
117
+
{
118
+
int rrt_msb = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_RRT_ALERT);
119
+
int rrt_lsb = i2c_reg_read1(CW2015_BUS, CW2015_ADDR, CW2015_REG_RRT_ALERT+1);
120
+
121
+
if(rrt_msb < 0 || rrt_lsb < 0)
122
+
return -1;
123
+
124
+
/* 13 bits, resolution 1 minute */
125
+
return ((rrt_msb & 0x1f) << 8) | rrt_lsb;
126
+
}
127
+
128
+
const uint8_t* cw2015_get_bat_info(void)
129
+
{
130
+
return &chip_batinfo[0];
131
+
}
132
+
133
+
#ifndef BOOTLOADER
134
+
enum {
135
+
CW2015_DEBUG_VCELL = 0,
136
+
CW2015_DEBUG_SOC,
137
+
CW2015_DEBUG_RRT,
138
+
CW2015_DEBUG_BATINFO,
139
+
CW2015_DEBUG_BATINFO_LAST = CW2015_DEBUG_BATINFO + 7,
140
+
CW2015_DEBUG_NUM_ENTRIES,
141
+
};
142
+
143
+
static int cw2015_debug_menu_cb(int action, struct gui_synclist* lists)
144
+
{
145
+
(void)lists;
146
+
147
+
if(action == ACTION_NONE)
148
+
action = ACTION_REDRAW;
149
+
150
+
return action;
151
+
}
152
+
153
+
static const char* cw2015_debug_menu_get_name(int item, void* data,
154
+
char* buf, size_t buflen)
155
+
{
156
+
(void)data;
157
+
158
+
/* hexdump of battery info */
159
+
if(item >= CW2015_DEBUG_BATINFO && item <= CW2015_DEBUG_BATINFO_LAST) {
160
+
int i = item - CW2015_DEBUG_BATINFO;
161
+
const uint8_t* batinfo = cw2015_get_bat_info();
162
+
snprintf(buf, buflen, "BatInfo%d: %02x %02x %02x %02x %02x %02x %02x %02x", i,
163
+
batinfo[8*i + 0], batinfo[8*i + 1], batinfo[8*i + 2], batinfo[8*i + 3],
164
+
batinfo[8*i + 4], batinfo[8*i + 5], batinfo[8*i + 6], batinfo[8*i + 7]);
165
+
return buf;
166
+
}
167
+
168
+
switch(item) {
169
+
case CW2015_DEBUG_VCELL:
170
+
snprintf(buf, buflen, "VCell: %d mV", cw2015_get_vcell());
171
+
return buf;
172
+
case CW2015_DEBUG_SOC:
173
+
snprintf(buf, buflen, "SOC: %d%%", cw2015_get_soc());
174
+
return buf;
175
+
case CW2015_DEBUG_RRT:
176
+
snprintf(buf, buflen, "Runtime: %d min", cw2015_get_rrt());
177
+
return buf;
178
+
default:
179
+
return "---";
180
+
}
181
+
}
182
+
183
+
bool cw2015_debug_menu(void)
184
+
{
185
+
struct simplelist_info info;
186
+
simplelist_info_init(&info, "CW2015 debug", CW2015_DEBUG_NUM_ENTRIES, NULL);
187
+
info.action_callback = cw2015_debug_menu_cb;
188
+
info.get_name = cw2015_debug_menu_get_name;
189
+
return simplelist_show_list(&info);
190
+
}
191
+
#endif
+2
firmware/export/audiohw.h
+2
firmware/export/audiohw.h
+4
firmware/export/config.h
+4
firmware/export/config.h
···
160
#define FIIO_M3K_LINUX_PAD 71
161
#define EROSQ_PAD 72
162
#define FIIO_M3K_PAD 73
163
164
/* CONFIG_REMOTE_KEYPAD */
165
#define H100_REMOTE 1
···
274
#define LCD_IHIFI770C 67 /* as used by IHIFI 770C */
275
#define LCD_IHIFI800 68 /* as used by IHIFI 800 */
276
#define LCD_FIIOM3K 69 /* as used by the FiiO M3K */
277
278
/* LCD_PIXELFORMAT */
279
#define HORIZONTAL_PACKING 1
···
592
#include "config/fiiom3k.h"
593
#elif defined(EROS_Q)
594
#include "config/aigoerosq.h"
595
#else
596
//#error "unknown hwardware platform!"
597
#endif
···
160
#define FIIO_M3K_LINUX_PAD 71
161
#define EROSQ_PAD 72
162
#define FIIO_M3K_PAD 73
163
+
#define SHANLING_Q1_PAD 74
164
165
/* CONFIG_REMOTE_KEYPAD */
166
#define H100_REMOTE 1
···
275
#define LCD_IHIFI770C 67 /* as used by IHIFI 770C */
276
#define LCD_IHIFI800 68 /* as used by IHIFI 800 */
277
#define LCD_FIIOM3K 69 /* as used by the FiiO M3K */
278
+
#define LCD_SHANLING_Q1 70 /* as used by the Shanling Q1 */
279
280
/* LCD_PIXELFORMAT */
281
#define HORIZONTAL_PACKING 1
···
594
#include "config/fiiom3k.h"
595
#elif defined(EROS_Q)
596
#include "config/aigoerosq.h"
597
+
#elif defined(SHANLING_Q1)
598
+
#include "config/shanlingq1.h"
599
#else
600
//#error "unknown hwardware platform!"
601
#endif
+119
firmware/export/config/shanlingq1.h
+119
firmware/export/config/shanlingq1.h
···
···
1
+
/* RoLo-related defines */
2
+
#define MODEL_NAME "Shanling Q1"
3
+
#define MODEL_NUMBER 115
4
+
#define BOOTFILE_EXT "q1"
5
+
#define BOOTFILE "rockbox." BOOTFILE_EXT
6
+
#define BOOTDIR "/.rockbox"
7
+
#define FIRMWARE_OFFSET_FILE_CRC 0
8
+
#define FIRMWARE_OFFSET_FILE_DATA 8
9
+
10
+
/* CPU defines */
11
+
#define CONFIG_CPU X1000
12
+
#define X1000_EXCLK_FREQ 24000000
13
+
#define CPU_FREQ 1008000000
14
+
15
+
#ifndef SIMULATOR
16
+
#define TIMER_FREQ X1000_EXCLK_FREQ
17
+
#endif
18
+
19
+
/* Kernel defines */
20
+
#define INCLUDE_TIMEOUT_API
21
+
#define HAVE_SEMAPHORE_OBJECTS
22
+
23
+
/* Drivers */
24
+
#define HAVE_I2C_ASYNC
25
+
26
+
/* Buffer for plugins and codecs. */
27
+
#define PLUGIN_BUFFER_SIZE 0x200000 /* 2 MiB */
28
+
#define CODEC_SIZE 0x100000 /* 1 MiB */
29
+
30
+
/* LCD defines */
31
+
#define CONFIG_LCD LCD_SHANLING_Q1
32
+
#define LCD_WIDTH 360
33
+
#define LCD_HEIGHT 400
34
+
#define LCD_DEPTH 16
35
+
#define LCD_PIXELFORMAT RGB565
36
+
#define LCD_DPI 200
37
+
#define HAVE_LCD_COLOR
38
+
#define HAVE_LCD_BITMAP
39
+
#define HAVE_LCD_ENABLE
40
+
#define LCD_X1000_FASTSLEEP
41
+
#define LCD_X1000_DMA_WAIT_FOR_FRAME
42
+
43
+
/* Backlight defines */
44
+
#define HAVE_BACKLIGHT
45
+
#define HAVE_BACKLIGHT_BRIGHTNESS
46
+
#define MIN_BRIGHTNESS_SETTING 1
47
+
#define MAX_BRIGHTNESS_SETTING 100
48
+
#define BRIGHTNESS_STEP 5
49
+
#define DEFAULT_BRIGHTNESS_SETTING 70
50
+
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
51
+
52
+
/* Codec / audio hardware defines */
53
+
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192
54
+
#define HAVE_ES9218
55
+
#define HAVE_SW_TONE_CONTROLS
56
+
57
+
/* Button defines */
58
+
#define CONFIG_KEYPAD SHANLING_Q1_PAD
59
+
#define HAVE_TOUCHSCREEN
60
+
#define HAVE_BUTTON_DATA
61
+
#define HAVE_FT6x06
62
+
#define HAVE_HEADPHONE_DETECTION
63
+
64
+
/* Storage defines */
65
+
#define CONFIG_STORAGE STORAGE_SD
66
+
#define HAVE_HOTSWAP
67
+
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
68
+
#define HAVE_MULTIDRIVE
69
+
#define NUM_DRIVES 1
70
+
#define STORAGE_WANTS_ALIGN
71
+
#define STORAGE_NEEDS_BOUNCE_BUFFER
72
+
73
+
/* RTC settings */
74
+
#define CONFIG_RTC RTC_X1000
75
+
/* TODO: implement HAVE_RTC_ALARM */
76
+
77
+
/* Power management */
78
+
#define CONFIG_BATTERY_MEASURE (VOLTAGE_MEASURE)
79
+
#define CONFIG_CHARGING CHARGING_MONITOR
80
+
#define HAVE_SW_POWEROFF
81
+
82
+
#ifndef SIMULATOR
83
+
/* TODO: get the CW2015 driver working correctly */
84
+
/* #define HAVE_CW2015 */
85
+
#define HAVE_AXP_PMU 192 /* Presumed */
86
+
#define HAVE_POWEROFF_WHILE_CHARGING
87
+
#endif
88
+
89
+
/* Only one battery type */
90
+
#define BATTERY_CAPACITY_DEFAULT 1100
91
+
#define BATTERY_CAPACITY_MIN 1100
92
+
#define BATTERY_CAPACITY_MAX 1100
93
+
#define BATTERY_CAPACITY_INC 0
94
+
#define BATTERY_TYPES_COUNT 1
95
+
96
+
/* USB support */
97
+
#ifndef SIMULATOR
98
+
#define CONFIG_USBOTG USBOTG_DESIGNWARE
99
+
#define USB_DW_ARCH_SLAVE
100
+
#define USB_DW_TURNAROUND 5
101
+
#define HAVE_USBSTACK
102
+
#define USB_VENDOR_ID 0x0525 /* Same as the xDuuo X3, for some reason. */
103
+
#define USB_PRODUCT_ID 0xa4a5 /* Nb. DAC mode uses 20b1:301f 'XMOS Ltd' */
104
+
#define USB_DEVBSS_ATTR __attribute__((aligned(32)))
105
+
#define HAVE_USB_POWER
106
+
#define HAVE_USB_CHARGING_ENABLE
107
+
#define HAVE_BOOTLOADER_USB_MODE
108
+
#endif
109
+
110
+
/* Rockbox capabilities */
111
+
#define HAVE_FAT16SUPPORT
112
+
#define HAVE_ALBUMART
113
+
#define HAVE_BMP_SCALING
114
+
#define HAVE_JPEG
115
+
#define HAVE_TAGCACHE
116
+
#define HAVE_VOLUME_IN_LIST
117
+
#define HAVE_QUICKSCREEN
118
+
#define HAVE_HOTKEY
119
+
#define AB_REPEAT_ENABLE
+57
firmware/export/cw2015.h
+57
firmware/export/cw2015.h
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#ifndef __CW2015_H__
23
+
#define __CW2015_H__
24
+
25
+
#include <stdint.h>
26
+
#include <stdbool.h>
27
+
28
+
/* Driver for I2C battery fuel gauge IC CW2015. */
29
+
30
+
#define CW2015_REG_VERSION 0x00
31
+
#define CW2015_REG_VCELL 0x02 /* 14 bits, registers 0x02 - 0x03 */
32
+
#define CW2015_REG_SOC 0x04 /* 16 bits, registers 0x04 - 0x05 */
33
+
#define CW2015_REG_RRT_ALERT 0x06 /* 13 bit RRT + alert flag, 0x06-0x07 */
34
+
#define CW2015_REG_CONFIG 0x08
35
+
#define CW2015_REG_MODE 0x0a
36
+
#define CW2015_REG_BATINFO 0x10 /* cf. mainline Linux CW2015 driver */
37
+
#define CW2015_SIZE_BATINFO 64
38
+
39
+
extern void cw2015_init(void);
40
+
41
+
/* Read the battery terminal voltage, converted to millivolts. */
42
+
extern int cw2015_get_vcell(void);
43
+
44
+
/* Read the SOC, in percent (0-100%). */
45
+
extern int cw2015_get_soc(void);
46
+
47
+
/* Get the estimated remaining run time, in minutes.
48
+
* Not a linearly varying quantity, according to the datasheet. */
49
+
extern int cw2015_get_rrt(void);
50
+
51
+
/* Read the current battery profile */
52
+
extern const uint8_t* cw2015_get_bat_info(void);
53
+
54
+
/* Debug screen */
55
+
extern bool cw2015_debug_menu(void);
56
+
57
+
#endif /* __CW2015_H__ */
+230
firmware/export/es9218.h
+230
firmware/export/es9218.h
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#ifndef __ES9218_H__
23
+
#define __ES9218_H__
24
+
25
+
#include <stdbool.h>
26
+
#include <stdint.h>
27
+
28
+
#define AUDIOHW_CAPS (FILTER_ROLL_OFF_CAP|POWER_MODE_CAP)
29
+
#define AUDIOHW_HAVE_ES9218_ROLL_OFF
30
+
31
+
#define ES9218_DIG_VOLUME_MIN (-1275)
32
+
#define ES9218_DIG_VOLUME_MAX 0
33
+
#define ES9218_DIG_VOLUME_STEP 5
34
+
35
+
#define ES9218_AMP_VOLUME_MIN (-240)
36
+
#define ES9218_AMP_VOLUME_MAX 0
37
+
#define ES9218_AMP_VOLUME_STEP 10
38
+
39
+
AUDIOHW_SETTING(VOLUME, "dB", 1, ES9218_DIG_VOLUME_STEP,
40
+
ES9218_DIG_VOLUME_MIN, ES9218_DIG_VOLUME_MAX, -200)
41
+
AUDIOHW_SETTING(FILTER_ROLL_OFF, "", 0, 1, 0, 7, 0)
42
+
AUDIOHW_SETTING(POWER_MODE, "", 0, 1, 0, 1, 0)
43
+
44
+
/* Register addresses */
45
+
#define ES9218_REG_SYSTEM 0x00
46
+
#define ES9218_REG_INPUT_SEL 0x01
47
+
#define ES9218_REG_MIX_AUTOMUTE 0x02
48
+
#define ES9218_REG_ANALOG_VOL 0x03
49
+
#define ES9218_REG_AUTOMUTE_TIME 0x04
50
+
#define ES9218_REG_AUTOMUTE_LEVEL 0x05
51
+
#define ES9218_REG_DOP_VOLUME_RAMP 0x06
52
+
#define ES9218_REG_FILTER_SYS_MUTE 0x07
53
+
#define ES9218_REG_GPIO1_2_CONFIG 0x08
54
+
#define ES9218_REG_RESERVED_1 0x09
55
+
#define ES9218_REG_MASTER_MODE_CONFIG 0x0a
56
+
#define ES9218_REG_OVERCURRENT_PROT 0x0b
57
+
#define ES9218_REG_ASRC_DPLL_BANDWIDTH 0x0c
58
+
#define ES9218_REG_THD_COMP_BYPASS 0x0d
59
+
#define ES9218_REG_SOFT_START_CONFIG 0x0e
60
+
#define ES9218_REG_VOLUME_LEFT 0x0f
61
+
#define ES9218_REG_VOLUME_RIGHT 0x10
62
+
#define ES9218_REG_MASTER_TRIM_BIT0_7 0x11
63
+
#define ES9218_REG_MASTER_TRIM_BIT8_15 0x12
64
+
#define ES9218_REG_MASTER_TRIM_BIT16_23 0x13
65
+
#define ES9218_REG_MASTER_TRIM_BIT24_31 0x14
66
+
#define ES9218_REG_GPIO_INPUT_SEL 0x15
67
+
#define ES9218_REG_THD_COMP_C2_LO 0x16
68
+
#define ES9218_REG_THD_COMP_C2_HI 0x17
69
+
#define ES9218_REG_THD_COMP_C3_LO 0x18
70
+
#define ES9218_REG_THD_COMP_C3_HI 0x19
71
+
#define ES9218_REG_CHARGE_PUMP_SS_DELAY 0x1a
72
+
#define ES9218_REG_GENERAL_CONFIG 0x1b
73
+
#define ES9218_REG_RESERVED_2 0x1c
74
+
#define ES9218_REG_GPIO_INV_CLOCK_GEAR 0x1d
75
+
#define ES9218_REG_CHARGE_PUMP_CLK_LO 0x1e
76
+
#define ES9218_REG_CHARGE_PUMP_CLK_HI 0x1f
77
+
#define ES9218_REG_AMP_CONFIG 0x20
78
+
#define ES9218_REG_INTERRUPT_MASK 0x21
79
+
#define ES9218_REG_PROG_NCO_BIT0_7 0x22
80
+
#define ES9218_REG_PROG_NCO_BIT8_15 0x23
81
+
#define ES9218_REG_PROG_NCO_BIT16_23 0x24
82
+
#define ES9218_REG_PROG_NCO_BIT24_31 0x25
83
+
#define ES9218_REG_RESERVED_3 0x27
84
+
#define ES9218_REG_FIR_RAM_ADDR 0x28
85
+
#define ES9218_REG_FIR_DATA_BIT0_7 0x29
86
+
#define ES9218_REG_FIR_DATA_BIT8_15 0x2a
87
+
#define ES9218_REG_FIR_DATA_BIT16_23 0x2b
88
+
#define ES9218_REG_PROG_FIR_CONFIG 0x2c
89
+
#define ES9218_REG_ANALOG_OVERRIDE_1 0x2d
90
+
#define ES9218_REG_ANALOG_OVERRIDE_2 0x2e
91
+
#define ES9218_REG_ANALOG_OVERRIDE_3 0x2f
92
+
#define ES9218_REG_ANALOG_CTRL 0x30
93
+
#define ES9218_REG_CLKGEAR_CFG_BIT0_7 0x31
94
+
#define ES9218_REG_CLKGEAR_CFG_BIT8_15 0x32
95
+
#define ES9218_REG_CLKGEAR_CFG_BIT16_23 0x33
96
+
#define ES9218_REG_RESERVED_4 0x34
97
+
#define ES9218_REG_THD_COMP_C2_CH2_LO 0x35
98
+
#define ES9218_REG_THD_COMP_C2_CH2_HI 0x36
99
+
#define ES9218_REG_THD_COMP_C3_CH2_LO 0x37
100
+
#define ES9218_REG_THD_COMP_C3_CH2_HI 0x38
101
+
#define ES9218_REG_RESERVED_5 0x39
102
+
#define ES9218_REG_RESERVED_6 0x3a
103
+
#define ES9218_REG_RESERVED_7 0x3b
104
+
#define ES9218_REG_RESERVED_8 0x3c
105
+
#define ES9218_REG_CHIP_ID_AND_STATUS 0x40
106
+
#define ES9218_REG_GPIO_AND_CLOCK_GEAR 0x41
107
+
#define ES9218_REG_DPLL_NUMBER_BIT0_7 0x42
108
+
#define ES9218_REG_DPLL_NUMBER_BIT8_15 0x43
109
+
#define ES9218_REG_DPLL_NUMBER_BIT16_23 0x44
110
+
#define ES9218_REG_DPLL_NUMBER_BIT24_31 0x45
111
+
#define ES9218_REG_INPUT_MUTE_STATUS 0x48
112
+
#define ES9218_REG_FIR_READ_BIT0_7 0x49
113
+
#define ES9218_REG_FIR_READ_BIT8_15 0x4a
114
+
#define ES9218_REG_FIR_READ_BIT16_23 0x4b
115
+
116
+
enum es9218_clock_gear {
117
+
ES9218_CLK_GEAR_1 = 0, /* CLK = XI/1 */
118
+
ES9218_CLK_GEAR_2 = 1, /* CLK = XI/2 */
119
+
ES9218_CLK_GEAR_4 = 2, /* CLK = XI/4 */
120
+
ES9218_CLK_GEAR_8 = 3, /* CLK = XI/8 */
121
+
};
122
+
123
+
enum es9218_amp_mode {
124
+
ES9218_AMP_MODE_CORE_ON = 0,
125
+
ES9218_AMP_MODE_LOWFI = 1,
126
+
ES9218_AMP_MODE_1VRMS = 2,
127
+
ES9218_AMP_MODE_2VRMS = 3,
128
+
};
129
+
130
+
enum es9218_iface_role {
131
+
ES9218_IFACE_ROLE_SLAVE = 0,
132
+
ES9218_IFACE_ROLE_MASTER = 1,
133
+
};
134
+
135
+
enum es9218_iface_format {
136
+
ES9218_IFACE_FORMAT_I2S = 0,
137
+
ES9218_IFACE_FORMAT_LJUST = 1,
138
+
ES9218_IFACE_FORMAT_RJUST = 2,
139
+
};
140
+
141
+
enum es9218_iface_bits {
142
+
ES9218_IFACE_BITS_16 = 0,
143
+
ES9218_IFACE_BITS_24 = 1,
144
+
ES9218_IFACE_BITS_32 = 2,
145
+
};
146
+
147
+
enum es9218_filter_type {
148
+
ES9218_FILTER_LINEAR_FAST = 0,
149
+
ES9218_FILTER_LINEAR_SLOW = 1,
150
+
ES9218_FILTER_MINIMUM_FAST = 2,
151
+
ES9218_FILTER_MINIMUM_SLOW = 3,
152
+
ES9218_FILTER_APODIZING_1 = 4,
153
+
ES9218_FILTER_APODIZING_2 = 5,
154
+
ES9218_FILTER_HYBRID_FAST = 6,
155
+
ES9218_FILTER_BRICK_WALL = 7,
156
+
};
157
+
158
+
/* Power DAC on or off */
159
+
extern void es9218_open(void);
160
+
extern void es9218_close(void);
161
+
162
+
/* Clock controls
163
+
*
164
+
* - Clock gear divides the input master clock to produce the DAC's clock.
165
+
* Frequency can be lowered to save power when using lower sample rates.
166
+
*
167
+
* - NCO (numerically controller oscillator), according to the datasheet,
168
+
* defines the ratio between the DAC's clock and the FSR (for PCM modes,
169
+
* this is I2S frame clock = sample rate). In master mode it effectively
170
+
* controls the sampling frequency by setting the I2S frame clock output.
171
+
* It can also be used in slave mode, but other parts of the datasheet
172
+
* say contradictory things about synchronous operation in slave mode.
173
+
*
174
+
* - If using NCO mode and a varying MCLK input (eg. input from the SoC) then
175
+
* you will need to call es9218_recompute_nco() when changing MCLK in order
176
+
* to refresh the NCO setting.
177
+
*/
178
+
extern void es9218_set_clock_gear(enum es9218_clock_gear gear);
179
+
extern void es9218_set_nco_frequency(uint32_t fsr);
180
+
extern void es9218_recompute_nco(void);
181
+
182
+
/* Amplifier controls */
183
+
extern void es9218_set_amp_mode(enum es9218_amp_mode mode);
184
+
extern void es9218_set_amp_powered(bool en);
185
+
186
+
/* Interface selection */
187
+
extern void es9218_set_iface_role(enum es9218_iface_role role);
188
+
extern void es9218_set_iface_format(enum es9218_iface_format fmt,
189
+
enum es9218_iface_bits bits);
190
+
191
+
/* Volume controls, all volumes given in units of dB/10 */
192
+
extern void es9218_set_dig_volume(int vol_l, int vol_r);
193
+
extern void es9218_set_amp_volume(int vol);
194
+
195
+
/* System mute */
196
+
extern void es9218_mute(bool muted);
197
+
198
+
/* Oversampling filter */
199
+
extern void es9218_set_filter(enum es9218_filter_type filt);
200
+
201
+
/* Automute settings */
202
+
extern void es9218_set_automute_time(int time);
203
+
extern void es9218_set_automute_level(int dB);
204
+
extern void es9218_set_automute_fast_mode(bool en);
205
+
206
+
/* DPLL bandwidth setting (knob = 0-15) */
207
+
extern void es9218_set_dpll_bandwidth(int knob);
208
+
209
+
/* THD compensation */
210
+
extern void es9218_set_thd_compensation(bool en);
211
+
extern void es9218_set_thd_coeffs(uint16_t c2, uint16_t c3);
212
+
213
+
/* Direct register read/write/update operations */
214
+
extern int es9218_read(int reg);
215
+
extern void es9218_write(int reg, uint8_t val);
216
+
extern void es9218_update(int reg, uint8_t msk, uint8_t val);
217
+
218
+
/* GPIO pin setting callbacks */
219
+
extern void es9218_set_power_pin(int level);
220
+
extern void es9218_set_reset_pin(int level);
221
+
222
+
/* XI(MCLK) getter -- supplied by the target.
223
+
*
224
+
* Note: when changing the supplied MCLK frequency, the NCO will need to be
225
+
* reprogrammed for the new master clock. Call es9218_recompute_nco() to
226
+
* force this. Not necessary if you're not using NCO mode.
227
+
*/
228
+
extern uint32_t es9218_get_mclk(void);
229
+
230
+
#endif /* __ES9218_H__ */
+8
firmware/target/hosted/sdl/sim-ui-defines.h
+8
firmware/target/hosted/sdl/sim-ui-defines.h
+6
firmware/target/mips/ingenic_x1000/debug-x1000.c
+6
firmware/target/mips/ingenic_x1000/debug-x1000.c
···
152
#ifdef HAVE_AXP_PMU
153
extern bool axp_debug_menu(void);
154
#endif
155
+
#ifdef HAVE_CW2015
156
+
extern bool cw2015_debug_menu(void);
157
+
#endif
158
159
/* Menu definition */
160
static const struct {
···
172
#endif
173
#ifdef HAVE_AXP_PMU
174
{"Power stats", &axp_debug_menu},
175
+
#endif
176
+
#ifdef HAVE_CW2015
177
+
{"CW2015 debug", &cw2015_debug_menu},
178
#endif
179
};
180
+12
-1
firmware/target/mips/ingenic_x1000/msc-x1000.c
+12
-1
firmware/target/mips/ingenic_x1000/msc-x1000.c
···
42
#define DEBOUNCE_TIME (HZ/10)
43
44
static const msc_config msc_configs[] = {
45
+
#if defined(FIIO_M3K)
46
#define MSC_CLOCK_SOURCE X1000_CLK_SCLK_A
47
{
48
.msc_nr = 0,
···
52
.cd_gpio = GPIO_MSC0_CD,
53
.cd_active_level = 0,
54
},
55
+
#elif defined(SHANLING_Q1)
56
+
#define MSC_CLOCK_SOURCE X1000_CLK_MPLL
57
+
{
58
+
.msc_nr = 0,
59
+
.msc_type = MSC_TYPE_SD,
60
+
.bus_width = 4,
61
+
.label = "microSD",
62
+
.cd_gpio = GPIO_MSC0_CD,
63
+
.cd_active_level = 0,
64
+
},
65
+
/* NOTE: SDIO wifi card is on msc1 */
66
#else
67
# error "Please add X1000 MSC config"
68
#endif
+1
-1
firmware/target/mips/ingenic_x1000/nand-x1000.c
+1
-1
firmware/target/mips/ingenic_x1000/nand-x1000.c
firmware/target/mips/ingenic_x1000/shanlingq1/adc-target.h
firmware/target/mips/ingenic_x1000/shanlingq1/adc-target.h
This is a binary file and will not be displayed.
+191
firmware/target/mips/ingenic_x1000/shanlingq1/audiohw-shanlingq1.c
+191
firmware/target/mips/ingenic_x1000/shanlingq1/audiohw-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "audiohw.h"
23
+
#include "system.h"
24
+
#include "pcm_sampr.h"
25
+
#include "aic-x1000.h"
26
+
#include "i2c-x1000.h"
27
+
#include "gpio-x1000.h"
28
+
#include "x1000/aic.h"
29
+
#include "x1000/cpm.h"
30
+
31
+
/* Codec has an dedicated oscillator connected, so it can operate
32
+
* as i2s master or slave. I can't distinguish any difference in
33
+
* terms of audio quality or power consumption. Code is left here
34
+
* for reference in case it proves useful to change it. */
35
+
#define CODEC_MASTER_MODE 0
36
+
37
+
static int cur_fsel = HW_FREQ_48;
38
+
static int cur_vol_l = 0, cur_vol_r = 0;
39
+
static int cur_filter = 0;
40
+
static enum es9218_amp_mode cur_amp_mode = ES9218_AMP_MODE_1VRMS;
41
+
42
+
static void codec_start(void)
43
+
{
44
+
es9218_open();
45
+
es9218_mute(true);
46
+
es9218_set_iface_role(CODEC_MASTER_MODE ? ES9218_IFACE_ROLE_MASTER
47
+
: ES9218_IFACE_ROLE_SLAVE);
48
+
es9218_set_iface_format(ES9218_IFACE_FORMAT_I2S, ES9218_IFACE_BITS_32);
49
+
es9218_set_dpll_bandwidth(10);
50
+
es9218_set_thd_compensation(true);
51
+
es9218_set_thd_coeffs(0, 0);
52
+
audiohw_set_filter_roll_off(cur_filter);
53
+
audiohw_set_frequency(cur_fsel);
54
+
audiohw_set_volume(cur_vol_l, cur_vol_r);
55
+
es9218_set_amp_mode(cur_amp_mode);
56
+
}
57
+
58
+
static void codec_stop(void)
59
+
{
60
+
es9218_mute(true);
61
+
es9218_close();
62
+
mdelay(1);
63
+
}
64
+
65
+
void audiohw_init(void)
66
+
{
67
+
/* Configure AIC */
68
+
aic_set_external_codec(true);
69
+
aic_set_i2s_mode(CODEC_MASTER_MODE ? AIC_I2S_SLAVE_MODE
70
+
: AIC_I2S_MASTER_MODE);
71
+
aic_enable_i2s_bit_clock(true);
72
+
73
+
/* Open DAC driver */
74
+
i2c_x1000_set_freq(1, I2C_FREQ_400K);
75
+
codec_start();
76
+
}
77
+
78
+
void audiohw_postinit(void)
79
+
{
80
+
es9218_mute(false);
81
+
}
82
+
83
+
void audiohw_close(void)
84
+
{
85
+
codec_stop();
86
+
}
87
+
88
+
void audiohw_set_frequency(int fsel)
89
+
{
90
+
int sampr = hw_freq_sampr[fsel];
91
+
92
+
/* choose clock gear setting, in line with the OF */
93
+
enum es9218_clock_gear clkgear;
94
+
if(sampr <= 48000)
95
+
clkgear = ES9218_CLK_GEAR_4;
96
+
else if(sampr <= 96000)
97
+
clkgear = ES9218_CLK_GEAR_2;
98
+
else
99
+
clkgear = ES9218_CLK_GEAR_1;
100
+
101
+
aic_enable_i2s_bit_clock(false);
102
+
es9218_set_clock_gear(clkgear);
103
+
104
+
if(CODEC_MASTER_MODE)
105
+
es9218_set_nco_frequency(sampr);
106
+
else
107
+
aic_set_i2s_clock(X1000_CLK_SCLK_A, sampr, 64);
108
+
109
+
aic_enable_i2s_bit_clock(true);
110
+
111
+
/* save frequency selection */
112
+
cur_fsel = fsel;
113
+
}
114
+
115
+
static int round_step_up(int x, int step)
116
+
{
117
+
int rem = x % step;
118
+
if(rem > 0)
119
+
rem -= step;
120
+
return x - rem;
121
+
}
122
+
123
+
void audiohw_set_volume(int vol_l, int vol_r)
124
+
{
125
+
/* save volume */
126
+
cur_vol_l = vol_l;
127
+
cur_vol_r = vol_r;
128
+
129
+
/* adjust the amp setting first */
130
+
int amp = round_step_up(MAX(vol_l, vol_r), ES9218_AMP_VOLUME_STEP);
131
+
amp = MIN(amp, ES9218_AMP_VOLUME_MAX);
132
+
amp = MAX(amp, ES9218_AMP_VOLUME_MIN);
133
+
134
+
/* adjust digital volumes */
135
+
vol_l -= amp;
136
+
vol_l = MIN(vol_l, ES9218_DIG_VOLUME_MAX);
137
+
vol_l = MAX(vol_l, ES9218_DIG_VOLUME_MIN);
138
+
139
+
vol_r -= amp;
140
+
vol_r = MIN(vol_r, ES9218_DIG_VOLUME_MAX);
141
+
vol_r = MAX(vol_r, ES9218_DIG_VOLUME_MIN);
142
+
143
+
/* program DAC */
144
+
es9218_set_amp_volume(amp);
145
+
es9218_set_dig_volume(vol_l, vol_r);
146
+
}
147
+
148
+
void audiohw_set_filter_roll_off(int value)
149
+
{
150
+
cur_filter = value;
151
+
es9218_set_filter(value);
152
+
}
153
+
154
+
void audiohw_set_power_mode(int mode)
155
+
{
156
+
enum es9218_amp_mode new_amp_mode;
157
+
if(mode == 0)
158
+
new_amp_mode = ES9218_AMP_MODE_2VRMS;
159
+
else
160
+
new_amp_mode = ES9218_AMP_MODE_1VRMS;
161
+
162
+
if(new_amp_mode != cur_amp_mode) {
163
+
codec_stop();
164
+
cur_amp_mode = new_amp_mode;
165
+
codec_start();
166
+
es9218_mute(false);
167
+
}
168
+
}
169
+
170
+
void es9218_set_power_pin(int level)
171
+
{
172
+
gpio_set_level(GPIO_ES9218_POWER, level ? 1 : 0);
173
+
}
174
+
175
+
void es9218_set_reset_pin(int level)
176
+
{
177
+
gpio_set_level(GPIO_ES9218_RESET, level ? 1 : 0);
178
+
}
179
+
180
+
uint32_t es9218_get_mclk(void)
181
+
{
182
+
/* Measured by running the DAC in asynchronous I2S slave mode,
183
+
* and reading back the DPLL number from regs 0x42-0x45 while
184
+
* playing back 44.1 KHz audio.
185
+
*
186
+
* CLK = (44_100 * 2**32) / 0x4b46e5
187
+
* = 38_393_403.29532737
188
+
* ~ 38.4 Mhz
189
+
*/
190
+
return 38400000;
191
+
}
+63
firmware/target/mips/ingenic_x1000/shanlingq1/backlight-shanlingq1.c
+63
firmware/target/mips/ingenic_x1000/shanlingq1/backlight-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "backlight.h"
23
+
#include "backlight-target.h"
24
+
#include "lcd.h"
25
+
#include "pwm-x1000.h"
26
+
27
+
#define BL_LCD_CHN 0
28
+
#define BL_LCD_PERIOD 10000
29
+
30
+
static int backlight_calc_duty(int period, int min_duty, int brightness)
31
+
{
32
+
return min_duty + (period - min_duty) * brightness / MAX_BRIGHTNESS_SETTING;
33
+
}
34
+
35
+
bool backlight_hw_init(void)
36
+
{
37
+
pwm_init(BL_LCD_CHN);
38
+
pwm_enable(BL_LCD_CHN);
39
+
backlight_hw_brightness(MAX_BRIGHTNESS_SETTING);
40
+
return true;
41
+
}
42
+
43
+
void backlight_hw_on(void)
44
+
{
45
+
pwm_enable(BL_LCD_CHN);
46
+
#ifdef HAVE_LCD_ENABLE
47
+
lcd_enable(true);
48
+
#endif
49
+
}
50
+
51
+
void backlight_hw_off(void)
52
+
{
53
+
pwm_disable(BL_LCD_CHN);
54
+
#ifdef HAVE_LCD_ENABLE
55
+
lcd_enable(false);
56
+
#endif
57
+
}
58
+
59
+
void backlight_hw_brightness(int brightness)
60
+
{
61
+
int duty_ns = backlight_calc_duty(BL_LCD_PERIOD, 0, brightness);
62
+
pwm_set_period(BL_LCD_CHN, BL_LCD_PERIOD, duty_ns);
63
+
}
+33
firmware/target/mips/ingenic_x1000/shanlingq1/backlight-target.h
+33
firmware/target/mips/ingenic_x1000/shanlingq1/backlight-target.h
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#ifndef __BACKLIGHT_TARGET_H__
23
+
#define __BACKLIGHT_TARGET_H__
24
+
25
+
#include <stdbool.h>
26
+
27
+
extern bool backlight_hw_init(void);
28
+
29
+
extern void backlight_hw_on(void);
30
+
extern void backlight_hw_off(void);
31
+
extern void backlight_hw_brightness(int brightness);
32
+
33
+
#endif /* __BACKLIGHT_TARGET_H__ */
+31
firmware/target/mips/ingenic_x1000/shanlingq1/boot.make
+31
firmware/target/mips/ingenic_x1000/shanlingq1/boot.make
···
···
1
+
# __________ __ ___.
2
+
# Open \______ \ ____ ____ | | _\_ |__ _______ ___
3
+
# Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
4
+
# Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
5
+
# Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
6
+
# \/ \/ \/ \/ \/
7
+
# $Id$
8
+
#
9
+
10
+
include $(ROOTDIR)/lib/microtar/microtar.make
11
+
12
+
.SECONDEXPANSION:
13
+
14
+
# FIXME(q1): verify NAND parameters
15
+
$(BUILDDIR)/spl.q1: $(BUILDDIR)/spl.bin
16
+
$(call PRINTS,MKSPL $(@F))$(TOOLSDIR)/mkspl-x1000 -type=nand -ppb=2 -bpp=2 $< $@
17
+
18
+
$(BUILDDIR)/bootloader.ucl: $(BUILDDIR)/bootloader.bin
19
+
$(call PRINTS,UCLPACK $(@F))$(TOOLSDIR)/uclpack --nrv2e -9 $< $@ >/dev/null
20
+
21
+
.PHONY: $(BUILDDIR)/bootloader-info.txt
22
+
$(BUILDDIR)/bootloader-info.txt:
23
+
$(call PRINTS,GEN $(@F))echo $(SVNVERSION) > $@
24
+
25
+
$(BUILDDIR)/$(BINARY): $(BUILDDIR)/spl.q1 \
26
+
$(BUILDDIR)/bootloader.ucl \
27
+
$(BUILDDIR)/bootloader-info.txt
28
+
$(call PRINTS,TAR $(@F))tar -C $(BUILDDIR) \
29
+
--numeric-owner --no-acls --no-xattrs --no-selinux \
30
+
--mode=0644 --owner=0 --group=0 \
31
+
-cf $@ $(call full_path_subst,$(BUILDDIR)/%,%,$^)
+32
firmware/target/mips/ingenic_x1000/shanlingq1/gpio-target.h
+32
firmware/target/mips/ingenic_x1000/shanlingq1/gpio-target.h
···
···
1
+
/* Name Port Pins Function */
2
+
DEFINE_PINGROUP(LCD_DATA, GPIO_A, 0xffff << 0, GPIOF_DEVICE(1))
3
+
DEFINE_PINGROUP(LCD_CONTROL, GPIO_B, 0x1a << 16, GPIOF_DEVICE(1))
4
+
DEFINE_PINGROUP(MSC0, GPIO_A, 0x3f << 20, GPIOF_DEVICE(1))
5
+
DEFINE_PINGROUP(SFC, GPIO_A, 0x3f << 26, GPIOF_DEVICE(1))
6
+
DEFINE_PINGROUP(I2S, GPIO_B, 0x1f << 0, GPIOF_DEVICE(1))
7
+
DEFINE_PINGROUP(I2C0, GPIO_B, 3 << 23, GPIOF_DEVICE(0))
8
+
DEFINE_PINGROUP(I2C1, GPIO_C, 3 << 26, GPIOF_DEVICE(0))
9
+
DEFINE_PINGROUP(I2C2, GPIO_D, 3 << 0, GPIOF_DEVICE(1))
10
+
11
+
/* Name Pin Function */
12
+
DEFINE_GPIO(FT6x06_INTERRUPT, GPIO_PA(16), GPIOF_INPUT)
13
+
DEFINE_GPIO(USB_DETECT, GPIO_PA(17), GPIOF_INPUT)
14
+
DEFINE_GPIO(FT6x06_RESET, GPIO_PA(19), GPIOF_OUTPUT(0))
15
+
DEFINE_GPIO(LCD_PWR, GPIO_PB(6), GPIOF_OUTPUT(1))
16
+
DEFINE_GPIO(FT6x06_POWER, GPIO_PB(8), GPIOF_OUTPUT(0))
17
+
DEFINE_GPIO(MSC0_CD, GPIO_PB(9), GPIOF_INPUT)
18
+
DEFINE_GPIO(ES9218_POWER, GPIO_PB(13), GPIOF_OUTPUT(0))
19
+
DEFINE_GPIO(LCD_RST, GPIO_PB(15), GPIOF_OUTPUT(1))
20
+
DEFINE_GPIO(LCD_RD, GPIO_PB(16), GPIOF_OUTPUT(1))
21
+
DEFINE_GPIO(LCD_CE, GPIO_PB(18), GPIOF_OUTPUT(1))
22
+
DEFINE_GPIO(BTN_PREV, GPIO_PB(21), GPIOF_INPUT)
23
+
DEFINE_GPIO(BTN_NEXT, GPIO_PB(22), GPIOF_INPUT)
24
+
DEFINE_GPIO(USB_DRVVBUS, GPIO_PB(25), GPIOF_OUTPUT(0))
25
+
DEFINE_GPIO(BTN_PLAY, GPIO_PB(28), GPIOF_INPUT)
26
+
DEFINE_GPIO(BTN_POWER, GPIO_PB(31), GPIOF_INPUT)
27
+
DEFINE_GPIO(AXP_IRQ, GPIO_PC(21), GPIOF_INPUT)
28
+
DEFINE_GPIO(USB_ID, GPIO_PC(23), GPIOF_INPUT)
29
+
DEFINE_GPIO(WHEEL1, GPIO_PD(2), GPIOF_INPUT)
30
+
DEFINE_GPIO(WHEEL2, GPIO_PD(3), GPIOF_INPUT)
31
+
DEFINE_GPIO(ES9218_GPIO2, GPIO_PD(4), GPIOF_OUTPUT(0))
32
+
DEFINE_GPIO(ES9218_RESET, GPIO_PD(5), GPIOF_OUTPUT(0))
+40
firmware/target/mips/ingenic_x1000/shanlingq1/i2c-target.h
+40
firmware/target/mips/ingenic_x1000/shanlingq1/i2c-target.h
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#ifndef __I2C_TARGET_H__
23
+
#define __I2C_TARGET_H__
24
+
25
+
#define I2C_ASYNC_BUS_COUNT 3
26
+
#define I2C_ASYNC_QUEUE_SIZE 4
27
+
28
+
#define FT6x06_BUS 0
29
+
#define FT6x06_ADDR 0x38
30
+
31
+
#define ES9218_BUS 1
32
+
#define ES9218_ADDR 0x48
33
+
34
+
#define AXP_PMU_BUS 2
35
+
#define AXP_PMU_ADDR 0x34
36
+
37
+
#define CW2015_BUS 2
38
+
#define CW2015_ADDR 0x62
39
+
40
+
#endif /* __I2C_TARGET_H__ */
+399
firmware/target/mips/ingenic_x1000/shanlingq1/lcd-shanlingq1.c
+399
firmware/target/mips/ingenic_x1000/shanlingq1/lcd-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "lcd.h"
23
+
#include "system.h"
24
+
#include "lcd-x1000.h"
25
+
#include "gpio-x1000.h"
26
+
27
+
/* LCD controller is probably an RM68090.
28
+
*/
29
+
30
+
static const uint32_t q1_lcd_cmd_enable[] = {
31
+
LCD_INSTR_CMD, 0x00,
32
+
LCD_INSTR_CMD, 0xbe,
33
+
LCD_INSTR_DAT, 0xc3,
34
+
LCD_INSTR_DAT, 0x29,
35
+
36
+
LCD_INSTR_CMD, 0x00,
37
+
LCD_INSTR_CMD, 0x01,
38
+
LCD_INSTR_DAT, 0x01,
39
+
LCD_INSTR_DAT, 0x04,
40
+
41
+
LCD_INSTR_CMD, 0x00,
42
+
LCD_INSTR_CMD, 0x02,
43
+
LCD_INSTR_DAT, 0x01,
44
+
LCD_INSTR_DAT, 0x00,
45
+
46
+
LCD_INSTR_CMD, 0x00,
47
+
LCD_INSTR_CMD, 0x03,
48
+
LCD_INSTR_DAT, 0x00,
49
+
LCD_INSTR_DAT, 0x10,
50
+
51
+
LCD_INSTR_CMD, 0x00,
52
+
LCD_INSTR_CMD, 0x05,
53
+
LCD_INSTR_DAT, 0x00,
54
+
LCD_INSTR_DAT, 0x00,
55
+
56
+
LCD_INSTR_CMD, 0x00,
57
+
LCD_INSTR_CMD, 0x06,
58
+
LCD_INSTR_DAT, 0x00,
59
+
LCD_INSTR_DAT, 0x00,
60
+
61
+
LCD_INSTR_CMD, 0x00,
62
+
LCD_INSTR_CMD, 0x07,
63
+
LCD_INSTR_DAT, 0x01,
64
+
LCD_INSTR_DAT, 0x03,
65
+
66
+
LCD_INSTR_CMD, 0x00,
67
+
LCD_INSTR_CMD, 0x08,
68
+
LCD_INSTR_DAT, 0x03,
69
+
LCD_INSTR_DAT, 0x03,
70
+
71
+
LCD_INSTR_CMD, 0x00,
72
+
LCD_INSTR_CMD, 0x0d,
73
+
LCD_INSTR_DAT, 0x00,
74
+
LCD_INSTR_DAT, 0x00,
75
+
76
+
LCD_INSTR_CMD, 0x00,
77
+
LCD_INSTR_CMD, 0x10,
78
+
LCD_INSTR_DAT, 0x00,
79
+
LCD_INSTR_DAT, 0xc1,
80
+
81
+
LCD_INSTR_CMD, 0x00,
82
+
LCD_INSTR_CMD, 0x11,
83
+
LCD_INSTR_DAT, 0xb1,
84
+
LCD_INSTR_DAT, 0x08,
85
+
86
+
LCD_INSTR_CMD, 0x00,
87
+
LCD_INSTR_CMD, 0x12,
88
+
LCD_INSTR_DAT, 0xb1,
89
+
LCD_INSTR_DAT, 0x08,
90
+
91
+
LCD_INSTR_CMD, 0x00,
92
+
LCD_INSTR_CMD, 0x13,
93
+
LCD_INSTR_DAT, 0x00,
94
+
LCD_INSTR_DAT, 0x0f,
95
+
96
+
LCD_INSTR_CMD, 0x00,
97
+
LCD_INSTR_CMD, 0x14,
98
+
LCD_INSTR_DAT, 0x00,
99
+
LCD_INSTR_DAT, 0x14,
100
+
101
+
LCD_INSTR_CMD, 0x00,
102
+
LCD_INSTR_CMD, 0x15,
103
+
LCD_INSTR_DAT, 0x00,
104
+
LCD_INSTR_DAT, 0x04,
105
+
106
+
LCD_INSTR_CMD, 0x00,
107
+
LCD_INSTR_CMD, 0x16,
108
+
LCD_INSTR_DAT, 0x00,
109
+
LCD_INSTR_DAT, 0x00,
110
+
111
+
LCD_INSTR_CMD, 0x00,
112
+
LCD_INSTR_CMD, 0x22,
113
+
LCD_INSTR_DAT, 0x00,
114
+
LCD_INSTR_DAT, 0x00,
115
+
116
+
LCD_INSTR_CMD, 0x00,
117
+
LCD_INSTR_CMD, 0x23,
118
+
LCD_INSTR_DAT, 0x00,
119
+
LCD_INSTR_DAT, 0x00,
120
+
121
+
LCD_INSTR_CMD, 0x00,
122
+
LCD_INSTR_CMD, 0x30,
123
+
LCD_INSTR_DAT, 0x7c,
124
+
LCD_INSTR_DAT, 0x3f,
125
+
126
+
LCD_INSTR_CMD, 0x00,
127
+
LCD_INSTR_CMD, 0x32,
128
+
LCD_INSTR_DAT, 0x00,
129
+
LCD_INSTR_DAT, 0x00,
130
+
131
+
LCD_INSTR_CMD, 0x00,
132
+
LCD_INSTR_CMD, 0x70,
133
+
LCD_INSTR_DAT, 0x00,
134
+
LCD_INSTR_DAT, 0x01,
135
+
136
+
LCD_INSTR_CMD, 0x00,
137
+
LCD_INSTR_CMD, 0x91,
138
+
LCD_INSTR_DAT, 0x01,
139
+
LCD_INSTR_DAT, 0x00,
140
+
141
+
LCD_INSTR_CMD, 0x00,
142
+
LCD_INSTR_CMD, 0xe0,
143
+
LCD_INSTR_DAT, 0x00,
144
+
LCD_INSTR_DAT, 0x01,
145
+
146
+
LCD_INSTR_CMD, 0x00,
147
+
LCD_INSTR_CMD, 0xe1,
148
+
LCD_INSTR_DAT, 0x00,
149
+
LCD_INSTR_DAT, 0x61,
150
+
151
+
LCD_INSTR_CMD, 0x01,
152
+
LCD_INSTR_CMD, 0x00,
153
+
LCD_INSTR_DAT, 0x10,
154
+
LCD_INSTR_DAT, 0x30,
155
+
156
+
LCD_INSTR_CMD, 0x01,
157
+
LCD_INSTR_CMD, 0x01,
158
+
LCD_INSTR_DAT, 0xf6,
159
+
LCD_INSTR_DAT, 0x3f,
160
+
161
+
LCD_INSTR_CMD, 0x01,
162
+
LCD_INSTR_CMD, 0x02,
163
+
LCD_INSTR_DAT, 0x50,
164
+
LCD_INSTR_DAT, 0x1f,
165
+
166
+
LCD_INSTR_CMD, 0x01,
167
+
LCD_INSTR_CMD, 0x03,
168
+
LCD_INSTR_DAT, 0x00,
169
+
LCD_INSTR_DAT, 0x30,
170
+
171
+
LCD_INSTR_CMD, 0x01,
172
+
LCD_INSTR_CMD, 0x08,
173
+
LCD_INSTR_DAT, 0x03,
174
+
LCD_INSTR_DAT, 0x00,
175
+
176
+
LCD_INSTR_CMD, 0x01,
177
+
LCD_INSTR_CMD, 0x11,
178
+
LCD_INSTR_DAT, 0x00,
179
+
LCD_INSTR_DAT, 0x01,
180
+
181
+
LCD_INSTR_CMD, 0x01,
182
+
LCD_INSTR_CMD, 0x35,
183
+
LCD_INSTR_DAT, 0x76,
184
+
LCD_INSTR_DAT, 0x66,
185
+
186
+
LCD_INSTR_CMD, 0x01,
187
+
LCD_INSTR_CMD, 0x39,
188
+
LCD_INSTR_DAT, 0x00,
189
+
LCD_INSTR_DAT, 0x26,
190
+
191
+
LCD_INSTR_CMD, 0x04,
192
+
LCD_INSTR_CMD, 0x00,
193
+
LCD_INSTR_DAT, 0x00,
194
+
LCD_INSTR_DAT, 0xc7,
195
+
196
+
LCD_INSTR_CMD, 0x04,
197
+
LCD_INSTR_CMD, 0x01,
198
+
LCD_INSTR_DAT, 0x00,
199
+
LCD_INSTR_DAT, 0x00,
200
+
201
+
LCD_INSTR_CMD, 0x06,
202
+
LCD_INSTR_CMD, 0x06,
203
+
LCD_INSTR_DAT, 0x00,
204
+
LCD_INSTR_DAT, 0x00,
205
+
206
+
LCD_INSTR_CMD, 0x03,
207
+
LCD_INSTR_CMD, 0x00,
208
+
LCD_INSTR_DAT, 0x0d,
209
+
LCD_INSTR_DAT, 0x0e,
210
+
211
+
LCD_INSTR_CMD, 0x03,
212
+
LCD_INSTR_CMD, 0x01,
213
+
LCD_INSTR_DAT, 0x00,
214
+
LCD_INSTR_DAT, 0x03,
215
+
216
+
LCD_INSTR_CMD, 0x03,
217
+
LCD_INSTR_CMD, 0x02,
218
+
LCD_INSTR_DAT, 0x08,
219
+
LCD_INSTR_DAT, 0x08,
220
+
221
+
LCD_INSTR_CMD, 0x03,
222
+
LCD_INSTR_CMD, 0x03,
223
+
LCD_INSTR_DAT, 0x02,
224
+
LCD_INSTR_DAT, 0x01,
225
+
226
+
LCD_INSTR_CMD, 0x03,
227
+
LCD_INSTR_CMD, 0x04,
228
+
LCD_INSTR_DAT, 0x03,
229
+
LCD_INSTR_DAT, 0x01,
230
+
231
+
LCD_INSTR_CMD, 0x03,
232
+
LCD_INSTR_CMD, 0x05,
233
+
LCD_INSTR_DAT, 0x00,
234
+
LCD_INSTR_DAT, 0x04,
235
+
236
+
LCD_INSTR_CMD, 0x03,
237
+
LCD_INSTR_CMD, 0x06,
238
+
LCD_INSTR_DAT, 0x1b,
239
+
LCD_INSTR_DAT, 0x21,
240
+
241
+
LCD_INSTR_CMD, 0x03,
242
+
LCD_INSTR_CMD, 0x07,
243
+
LCD_INSTR_DAT, 0x0f,
244
+
LCD_INSTR_DAT, 0x0e,
245
+
246
+
LCD_INSTR_CMD, 0x03,
247
+
LCD_INSTR_CMD, 0x08,
248
+
LCD_INSTR_DAT, 0x01,
249
+
LCD_INSTR_DAT, 0x04,
250
+
251
+
LCD_INSTR_CMD, 0x03,
252
+
LCD_INSTR_CMD, 0x09,
253
+
LCD_INSTR_DAT, 0x08,
254
+
LCD_INSTR_DAT, 0x08,
255
+
256
+
LCD_INSTR_CMD, 0x03,
257
+
LCD_INSTR_CMD, 0x0a,
258
+
LCD_INSTR_DAT, 0x02,
259
+
LCD_INSTR_DAT, 0x01,
260
+
261
+
LCD_INSTR_CMD, 0x03,
262
+
LCD_INSTR_CMD, 0x0b,
263
+
LCD_INSTR_DAT, 0x03,
264
+
LCD_INSTR_DAT, 0x01,
265
+
266
+
LCD_INSTR_CMD, 0x03,
267
+
LCD_INSTR_CMD, 0x0c,
268
+
LCD_INSTR_DAT, 0x00,
269
+
LCD_INSTR_DAT, 0x03,
270
+
271
+
LCD_INSTR_CMD, 0x03,
272
+
LCD_INSTR_CMD, 0x0d,
273
+
LCD_INSTR_DAT, 0x31,
274
+
LCD_INSTR_DAT, 0x34,
275
+
276
+
/* X start */
277
+
LCD_INSTR_CMD, 0x02,
278
+
LCD_INSTR_CMD, 0x10,
279
+
LCD_INSTR_DAT, 0x00,
280
+
LCD_INSTR_DAT, 0x1e, /* 30 */
281
+
282
+
/* X end */
283
+
LCD_INSTR_CMD, 0x02,
284
+
LCD_INSTR_CMD, 0x11,
285
+
LCD_INSTR_DAT, 0x01,
286
+
LCD_INSTR_DAT, 0x85, /* 389 */
287
+
288
+
/* Y start */
289
+
LCD_INSTR_CMD, 0x02,
290
+
LCD_INSTR_CMD, 0x12,
291
+
LCD_INSTR_DAT, 0x00,
292
+
LCD_INSTR_DAT, 0x00, /* 0 */
293
+
294
+
/* Y end */
295
+
LCD_INSTR_CMD, 0x02,
296
+
LCD_INSTR_CMD, 0x13,
297
+
LCD_INSTR_DAT, 0x01,
298
+
LCD_INSTR_DAT, 0x8f, /* 399 */
299
+
300
+
/* RAM write start X? */
301
+
LCD_INSTR_CMD, 0x02,
302
+
LCD_INSTR_CMD, 0x00,
303
+
LCD_INSTR_DAT, 0x00,
304
+
LCD_INSTR_DAT, 0x1e,
305
+
306
+
/* RAM write start Y? */
307
+
LCD_INSTR_CMD, 0x02,
308
+
LCD_INSTR_CMD, 0x01,
309
+
LCD_INSTR_DAT, 0x00,
310
+
LCD_INSTR_DAT, 0x00,
311
+
312
+
LCD_INSTR_CMD, 0x00,
313
+
LCD_INSTR_CMD, 0x03,
314
+
LCD_INSTR_DAT, 0x00,
315
+
LCD_INSTR_DAT, 0x30,
316
+
317
+
LCD_INSTR_CMD, 0x02,
318
+
LCD_INSTR_CMD, 0x02,
319
+
LCD_INSTR_END,
320
+
};
321
+
322
+
/* NOTE this sleep mode may not be saving power, but it gets rid of the
323
+
* ghost image that would otherwise remain on the display */
324
+
static const uint32_t q1_lcd_cmd_sleep[] = {
325
+
LCD_INSTR_CMD, 0x00,
326
+
LCD_INSTR_CMD, 0x10,
327
+
LCD_INSTR_DAT, 0x00,
328
+
LCD_INSTR_DAT, 0x03,
329
+
330
+
LCD_INSTR_CMD, 0x00,
331
+
LCD_INSTR_CMD, 0x07,
332
+
LCD_INSTR_DAT, 0x01,
333
+
LCD_INSTR_DAT, 0x01,
334
+
335
+
LCD_INSTR_END,
336
+
};
337
+
338
+
static const uint32_t q1_lcd_cmd_wake[] = {
339
+
LCD_INSTR_CMD, 0x00,
340
+
LCD_INSTR_CMD, 0x07,
341
+
LCD_INSTR_DAT, 0x01,
342
+
LCD_INSTR_DAT, 0x03,
343
+
344
+
LCD_INSTR_CMD, 0x00,
345
+
LCD_INSTR_CMD, 0x10,
346
+
LCD_INSTR_DAT, 0x00,
347
+
LCD_INSTR_DAT, 0xc1,
348
+
349
+
LCD_INSTR_END,
350
+
};
351
+
352
+
static const uint8_t __attribute__((aligned(64)))
353
+
q1_lcd_dma_wr_cmd[] = {0x02, 0x02, 0x02, 0x02};
354
+
355
+
const struct lcd_tgt_config lcd_tgt_config = {
356
+
.bus_width = 8,
357
+
.cmd_width = 8,
358
+
.use_6800_mode = 0,
359
+
.use_serial = 0,
360
+
.clk_polarity = 0,
361
+
.dc_polarity = 0,
362
+
.wr_polarity = 1,
363
+
.te_enable = 0,
364
+
.big_endian = 1,
365
+
.dma_wr_cmd_buf = &q1_lcd_dma_wr_cmd,
366
+
.dma_wr_cmd_size = sizeof(q1_lcd_dma_wr_cmd),
367
+
};
368
+
369
+
void lcd_tgt_enable(bool enable)
370
+
{
371
+
if(enable) {
372
+
/* power on the panel */
373
+
gpio_set_level(GPIO_LCD_PWR, 1);
374
+
gpio_set_level(GPIO_LCD_RST, 1);
375
+
gpio_set_level(GPIO_LCD_CE, 1);
376
+
gpio_set_level(GPIO_LCD_RD, 1);
377
+
mdelay(50);
378
+
gpio_set_level(GPIO_LCD_RST, 0);
379
+
mdelay(100);
380
+
gpio_set_level(GPIO_LCD_RST, 1);
381
+
mdelay(50);
382
+
gpio_set_level(GPIO_LCD_CE, 0);
383
+
384
+
/* Start the controller */
385
+
lcd_set_clock(X1000_CLK_MPLL, 50000000);
386
+
lcd_exec_commands(q1_lcd_cmd_enable);
387
+
} else {
388
+
/* FIXME: Shanling Q1 LCD power down sequence
389
+
* not important because we don't use it but it'd be nice to know */
390
+
}
391
+
}
392
+
393
+
void lcd_tgt_sleep(bool sleep)
394
+
{
395
+
if(sleep)
396
+
lcd_exec_commands(q1_lcd_cmd_sleep);
397
+
else
398
+
lcd_exec_commands(q1_lcd_cmd_wake);
399
+
}
+140
firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
+140
firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "power.h"
23
+
#include "adc.h"
24
+
#include "system.h"
25
+
#include "axp-pmu.h"
26
+
#ifdef HAVE_CW2015
27
+
# include "cw2015.h"
28
+
#endif
29
+
#ifdef HAVE_USB_CHARGING_ENABLE
30
+
# include "usb_core.h"
31
+
#endif
32
+
33
+
#include "i2c-x1000.h"
34
+
35
+
/* TODO: Better(?) battery reporting for Q1 using CW2015 driver
36
+
*
37
+
* The CW2015 has its own quirks so the driver has to be more complicated
38
+
* than "read stuff from I2C," unfortunately. Without fixing the quirks it
39
+
* is probably worse than the simple voltage-based method.
40
+
*
41
+
* A bigger problem is that it shares an I2C bus with the AXP192, but when
42
+
* we attempt to communicate with both chips, they start returning bogus
43
+
* data intermittently. Ususally, reads will return 0 but sometimes they
44
+
* can return other nonzero bogus data. It could be that one or the other is
45
+
* pulling the bus line down inappropriately, or maybe the hardware does not
46
+
* respect the bus free time between start/stop conditions and one of the
47
+
* devices is getting confused.
48
+
*/
49
+
50
+
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
51
+
{
52
+
3470
53
+
};
54
+
55
+
/* the OF shuts down at this voltage */
56
+
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
57
+
{
58
+
3400
59
+
};
60
+
61
+
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
62
+
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
63
+
{
64
+
{ 3400, 3639, 3697, 3723, 3757, 3786, 3836, 3906, 3980, 4050, 4159 }
65
+
};
66
+
67
+
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
68
+
const unsigned short percent_to_volt_charge[11] =
69
+
{
70
+
3485, 3780, 3836, 3857, 3890, 3930, 3986, 4062, 4158, 4185, 4196
71
+
};
72
+
73
+
void power_init(void)
74
+
{
75
+
i2c_x1000_set_freq(AXP_PMU_BUS, I2C_FREQ_400K);
76
+
axp_init();
77
+
#ifdef HAVE_CW2015
78
+
cw2015_init();
79
+
#endif
80
+
81
+
/* Change supply voltage from the default of 1250 mV to 1200 mV,
82
+
* this matches the original firmware's settings. Didn't observe
83
+
* any obviously bad behavior at 1250 mV, but better to be safe. */
84
+
axp_supply_set_voltage(AXP_SUPPLY_DCDC2, 1200);
85
+
86
+
/* For now, just turn everything on... definitely the touchscreen
87
+
* is powered by one of the outputs */
88
+
i2c_reg_modify1(AXP_PMU_BUS, AXP_PMU_ADDR,
89
+
AXP_REG_PWROUTPUTCTRL1, 0, 0x05, NULL);
90
+
i2c_reg_modify1(AXP_PMU_BUS, AXP_PMU_ADDR,
91
+
AXP_REG_PWROUTPUTCTRL2, 0, 0x0f, NULL);
92
+
i2c_reg_modify1(AXP_PMU_BUS, AXP_PMU_ADDR,
93
+
AXP_REG_DCDCWORKINGMODE, 0, 0xc0, NULL);
94
+
95
+
/* Delay to give power output time to stabilize */
96
+
mdelay(20);
97
+
}
98
+
99
+
#ifdef HAVE_USB_CHARGING_ENABLE
100
+
void usb_charging_maxcurrent_change(int maxcurrent)
101
+
{
102
+
axp_set_charge_current(maxcurrent);
103
+
}
104
+
#endif
105
+
106
+
void power_off(void)
107
+
{
108
+
axp_power_off();
109
+
while(1);
110
+
}
111
+
112
+
bool charging_state(void)
113
+
{
114
+
return axp_battery_status() == AXP_BATT_CHARGING;
115
+
}
116
+
117
+
int _battery_voltage(void)
118
+
{
119
+
/* CW2015 can also read battery voltage, but the AXP consistently
120
+
* reads ~20-30 mV higher so I suspect it's the "real" voltage. */
121
+
return axp_adc_read(ADC_BATTERY_VOLTAGE);
122
+
}
123
+
124
+
#if defined(HAVE_CW2015) && (CONFIG_BATTERY_MEASURE & PERCENTAGE_MEASURE) != 0
125
+
int _battery_level(void)
126
+
{
127
+
return cw2015_get_soc();
128
+
}
129
+
#endif
130
+
131
+
#if defined(HAVE_CW2015) && (CONFIG_BATTERY_MEASURE & TIME_MEASURE) != 0
132
+
int _battery_time(void)
133
+
{
134
+
return cw2015_get_rrt();
135
+
}
136
+
#endif
137
+
138
+
void adc_init(void)
139
+
{
140
+
}
+116
firmware/target/mips/ingenic_x1000/shanlingq1/spl-shanlingq1.c
+116
firmware/target/mips/ingenic_x1000/shanlingq1/spl-shanlingq1.c
···
···
1
+
/***************************************************************************
2
+
* __________ __ ___.
3
+
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
4
+
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5
+
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6
+
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7
+
* \/ \/ \/ \/ \/
8
+
* $Id$
9
+
*
10
+
* Copyright (C) 2021 Aidan MacDonald
11
+
*
12
+
* This program is free software; you can redistribute it and/or
13
+
* modify it under the terms of the GNU General Public License
14
+
* as published by the Free Software Foundation; either version 2
15
+
* of the License, or (at your option) any later version.
16
+
*
17
+
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18
+
* KIND, either express or implied.
19
+
*
20
+
****************************************************************************/
21
+
22
+
#include "system.h"
23
+
#include "clk-x1000.h"
24
+
#include "spl-x1000.h"
25
+
#include "gpio-x1000.h"
26
+
27
+
#define CMDLINE_COMMON \
28
+
"mem=64M@0x0 no_console_suspend console=ttyS2,115200n8 lpj=5009408 ip=off"
29
+
#define CMDLINE_NORMAL \
30
+
" init=/linuxrc ubi.mtd=5 root=ubi0:rootfs ubi.mtd=6 rootfstype=ubifs rw"
31
+
32
+
static int dualboot_setup(void)
33
+
{
34
+
spl_dualboot_init_clocktree();
35
+
spl_dualboot_init_uart2();
36
+
37
+
/* load PDMA MCU firmware */
38
+
jz_writef(CPM_CLKGR, PDMA(0));
39
+
return spl_storage_read(0x4000, 0x2000, (void*)0xb3422000);
40
+
}
41
+
42
+
const struct spl_boot_option spl_boot_options[] = {
43
+
[BOOT_OPTION_ROCKBOX] = {
44
+
.storage_addr = 0x6800,
45
+
.storage_size = 102 * 1024,
46
+
.load_addr = X1000_DRAM_BASE,
47
+
.exec_addr = X1000_DRAM_BASE,
48
+
.flags = BOOTFLAG_UCLPACK,
49
+
},
50
+
[BOOT_OPTION_OFW_PLAYER] = {
51
+
.storage_addr = 0x140000,
52
+
.storage_size = 8 * 1024 * 1024,
53
+
.load_addr = 0x80efffc0,
54
+
.exec_addr = 0x80f00000,
55
+
.cmdline = CMDLINE_COMMON CMDLINE_NORMAL,
56
+
.cmdline_addr = 0x80004000,
57
+
.setup = dualboot_setup,
58
+
},
59
+
[BOOT_OPTION_OFW_RECOVERY] = {
60
+
.storage_addr = 0x940000,
61
+
.storage_size = 10 * 1024 * 1024,
62
+
.load_addr = 0x80efffc0,
63
+
.exec_addr = 0x80f00000,
64
+
.cmdline = CMDLINE_COMMON,
65
+
.cmdline_addr = 0x80004000,
66
+
.setup = dualboot_setup,
67
+
},
68
+
};
69
+
70
+
int spl_get_boot_option(void)
71
+
{
72
+
/* Button debounce time in OST clock cycles */
73
+
const uint32_t btn_stable_time = 100 * (X1000_EXCLK_FREQ / 4000);
74
+
75
+
/* Buttons to poll */
76
+
const unsigned port = GPIO_B;
77
+
const uint32_t recov_pin = (1 << 22); /* Next */
78
+
const uint32_t orig_fw_pin = (1 << 21); /* Prev */
79
+
80
+
uint32_t pin = -1, lastpin = 0;
81
+
uint32_t deadline = 0;
82
+
int iter_count = 30; /* to avoid an infinite loop */
83
+
84
+
/* set GPIOs to input state */
85
+
gpioz_configure(port, recov_pin|orig_fw_pin, GPIOF_INPUT);
86
+
87
+
/* Poll until we get a stable reading */
88
+
do {
89
+
lastpin = pin;
90
+
pin = ~REG_GPIO_PIN(port) & (recov_pin|orig_fw_pin);
91
+
if(pin != lastpin) {
92
+
deadline = __ost_read32() + btn_stable_time;
93
+
iter_count -= 1;
94
+
}
95
+
} while(iter_count > 0 && __ost_read32() < deadline);
96
+
97
+
if(iter_count >= 0 && (pin & orig_fw_pin)) {
98
+
if(pin & recov_pin)
99
+
return BOOT_OPTION_OFW_RECOVERY;
100
+
else
101
+
return BOOT_OPTION_OFW_PLAYER;
102
+
}
103
+
104
+
return BOOT_OPTION_ROCKBOX;
105
+
}
106
+
107
+
void spl_error(void)
108
+
{
109
+
/* Flash the backlight */
110
+
int level = 0;
111
+
while(1) {
112
+
gpio_set_function(GPIO_PC(25), GPIOF_OUTPUT(level));
113
+
mdelay(100);
114
+
level = 1 - level;
115
+
}
116
+
}
+1
-1
firmware/target/mips/ingenic_x1000/spl-x1000.c
+1
-1
firmware/target/mips/ingenic_x1000/spl-x1000.c
+26
-1
tools/configure
+26
-1
tools/configure
···
1597
240) Rocker 228) NWZ-A860 series
1598
==FiiO== 229) NWZ-S750 series
1599
==AIGO== 244) M3K Linux
1600
+
245) Eros Q / K 246) M3K baremetal ==Shanling==
1601
+
260) Q1
1602
EOF
1603
1604
buildfor=`input`;
···
4107
t_cpu="mips"
4108
t_manufacturer="ingenic_x1000"
4109
t_model="fiiom3k"
4110
+
;;
4111
+
4112
+
260|shanlingq1)
4113
+
target_id=115
4114
+
modelname="shanlingq1"
4115
+
target="SHANLING_Q1"
4116
+
memory=64
4117
+
mipsr2elcc
4118
+
appextra="recorder:gui"
4119
+
plugins="yes"
4120
+
tool="$rootdir/tools/scramble -add=shq1 "
4121
+
boottool="" # not used
4122
+
output="rockbox.q1"
4123
+
bootoutput="bootloader.q1"
4124
+
sysfontbl="16-Terminus"
4125
+
# toolset is the tools within the tools directory that we build for
4126
+
# this particular target.
4127
+
toolset="$x1000tools"
4128
+
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
4129
+
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
4130
+
# architecture, manufacturer and model for the target-tree build
4131
+
t_cpu="mips"
4132
+
t_manufacturer="ingenic_x1000"
4133
+
t_model="shanlingq1"
4134
;;
4135
4136
*)
+2
tools/scramble.c
+2
tools/scramble.c
uisimulator/bitmaps/UI-shanlingq1.bmp
uisimulator/bitmaps/UI-shanlingq1.bmp
This is a binary file and will not be displayed.
+1
wps/AUTHORS
+1
wps/AUTHORS
+5
wps/WPSLIST
+5
wps/WPSLIST
···
82
wps.800x480x(16|24): cabbiev2.800x480x16.wps
83
wps.480x800x(16|24): cabbiev2.480x800x16.wps
84
wps.400x240x(16|24): cabbiev2.400x240x16.wps
85
wps.320x480x(16|24): cabbiev2.320x480x16.wps
86
wps.320x240x(16|24|32): cabbiev2.320x240x16.wps
87
wps.240x400x(16|24): cabbiev2.240x400x16.wps
···
111
Font.800x480x(16|24): 35-Adobe-Helvetica.fnt
112
Font.480x800x(16|24): 35-Adobe-Helvetica.fnt
113
Font.400x240x(16|24): 15-Adobe-Helvetica.fnt
114
Font.320x480x(16|24): 27-Adobe-Helvetica.fnt
115
Font.320x240x(16|24): 15-Adobe-Helvetica.fnt
116
Font.240x400x(16|24): 16-Adobe-Helvetica.fnt
···
144
backdrop.800x480x(16|24): backdrops/cabbiev2.800x480x16.bmp
145
backdrop.480x800x(16|24): backdrops/cabbiev2.480x800x16.bmp
146
backdrop.400x240x(16|24): backdrops/cabbiev2.400x240x16.bmp
147
backdrop.320x480x(16|24): backdrops/cabbiev2.320x480x16.bmp
148
backdrop.320x240x(16|24): backdrops/cabbiev2.320x240x16.bmp
149
backdrop.128x128x(16|24): backdrops/cabbiev2.128x128x16.bmp
···
170
iconset.800x480x(16|24): icons/tango_icons.32x32.bmp
171
iconset.480x800x(16|24): icons/tango_icons.32x32.bmp
172
iconset.400x240x(16|24): icons/tango_icons.16x16.bmp
173
iconset.320x480x(16|24): icons/tango_icons.24x24.bmp
174
iconset.320x240x(16|24|32): icons/tango_icons.16x16.bmp
175
iconset.128x128x(16|24): icons/tango_icons.12x12.bmp
···
189
viewers iconset.800x480x(16|24): icons/tango_icons_viewers.32x32.bmp
190
viewers iconset.480x800x(16|24): icons/tango_icons_viewers.32x32.bmp
191
viewers iconset.400x240x(16|24): icons/tango_icons_viewers.16x16.bmp
192
viewers iconset.320x480x(16|24): icons/tango_icons_viewers.24x24.bmp
193
viewers iconset.320x240x(16|24): icons/tango_icons_viewers.16x16.bmp
194
viewers iconset.128x128x(16|24): icons/tango_icons_viewers.12x12.bmp
···
82
wps.800x480x(16|24): cabbiev2.800x480x16.wps
83
wps.480x800x(16|24): cabbiev2.480x800x16.wps
84
wps.400x240x(16|24): cabbiev2.400x240x16.wps
85
+
wps.360x400x16: cabbiev2.360x400x16.wps
86
wps.320x480x(16|24): cabbiev2.320x480x16.wps
87
wps.320x240x(16|24|32): cabbiev2.320x240x16.wps
88
wps.240x400x(16|24): cabbiev2.240x400x16.wps
···
112
Font.800x480x(16|24): 35-Adobe-Helvetica.fnt
113
Font.480x800x(16|24): 35-Adobe-Helvetica.fnt
114
Font.400x240x(16|24): 15-Adobe-Helvetica.fnt
115
+
Font.360x400x16: 18-Adobe-Helvetica.fnt
116
Font.320x480x(16|24): 27-Adobe-Helvetica.fnt
117
Font.320x240x(16|24): 15-Adobe-Helvetica.fnt
118
Font.240x400x(16|24): 16-Adobe-Helvetica.fnt
···
146
backdrop.800x480x(16|24): backdrops/cabbiev2.800x480x16.bmp
147
backdrop.480x800x(16|24): backdrops/cabbiev2.480x800x16.bmp
148
backdrop.400x240x(16|24): backdrops/cabbiev2.400x240x16.bmp
149
+
backdrop.360x400x16: backdrops/cabbiev2.360x400x16.bmp
150
backdrop.320x480x(16|24): backdrops/cabbiev2.320x480x16.bmp
151
backdrop.320x240x(16|24): backdrops/cabbiev2.320x240x16.bmp
152
backdrop.128x128x(16|24): backdrops/cabbiev2.128x128x16.bmp
···
173
iconset.800x480x(16|24): icons/tango_icons.32x32.bmp
174
iconset.480x800x(16|24): icons/tango_icons.32x32.bmp
175
iconset.400x240x(16|24): icons/tango_icons.16x16.bmp
176
+
iconset.360x400x16: icons/tango_icons.32x32.bmp
177
iconset.320x480x(16|24): icons/tango_icons.24x24.bmp
178
iconset.320x240x(16|24|32): icons/tango_icons.16x16.bmp
179
iconset.128x128x(16|24): icons/tango_icons.12x12.bmp
···
193
viewers iconset.800x480x(16|24): icons/tango_icons_viewers.32x32.bmp
194
viewers iconset.480x800x(16|24): icons/tango_icons_viewers.32x32.bmp
195
viewers iconset.400x240x(16|24): icons/tango_icons_viewers.16x16.bmp
196
+
viewers iconset.360x400x16: icons/tango_icons_viewers.32x32.bmp
197
viewers iconset.320x480x(16|24): icons/tango_icons_viewers.24x24.bmp
198
viewers iconset.320x240x(16|24): icons/tango_icons_viewers.16x16.bmp
199
viewers iconset.128x128x(16|24): icons/tango_icons_viewers.12x12.bmp
+81
wps/cabbiev2.360x400x16.wps
+81
wps/cabbiev2.360x400x16.wps
···
···
1
+
# Cabbie v2.0
2
+
# (C) 2007-2012 The Authors (see /rockbox/wps/AUTHORS)
3
+
# Derived from "cabbie" (C) Yohann Misquitta
4
+
#
5
+
# Disable Status Bar
6
+
%wd
7
+
#
8
+
# Load Backdrop
9
+
%X(wpsbackdrop-360x400x16.bmp)
10
+
#
11
+
# Preload Images
12
+
%xl(A,lock-360x400x16.bmp,0,0,2)
13
+
%xl(B,battery-360x400x16.bmp,0,0,10)
14
+
%xl(C,volume-360x400x16.bmp,0,0,10)
15
+
%xl(D,shuffle-360x400x16.bmp,0,0)
16
+
%xl(E,repeat-360x400x16.bmp,0,0,4)
17
+
%xl(F,playmode-360x400x16.bmp,0,0,5)
18
+
#
19
+
# Album Art/Info Viewport Conditional
20
+
%?C<%Vd(a)|%Vd(b)>
21
+
#
22
+
# Progress Bar
23
+
%V(33,316,300,20,-)
24
+
%pb(0,0,-,20,pb-360x400x16.bmp)
25
+
#
26
+
# Hold
27
+
%V(16,365,38,29,-)
28
+
%?mh<%xd(Aa)|%xd(Ab)>
29
+
#
30
+
# Battery
31
+
%V(69,365,66,29,-)
32
+
%?bp<%?bc<%xd(Ba)|%xd(Bb)>|%?bl<|%xd(Bc)|%xd(Bd)|%xd(Be)|%xd(Bf)|%xd(Bg)|%xd(Bh)|%xd(Bi)|%xd(Bj)>>
33
+
#
34
+
# Volume
35
+
%V(147,365,50,29,-)
36
+
%?pv<%xd(Ca)|%xd(Cb)|%xd(Cc)|%xd(Cd)|%xd(Ce)|%xd(Cf)|%xd(Cg)|%xd(Ch)|%xd(Ci)|%xd(Cj)>
37
+
#
38
+
# Shuffle
39
+
%V(208,365,55,29,-)
40
+
%?ps<%xd(D)>
41
+
#
42
+
# Repeat
43
+
%V(273,365,27,29,-)
44
+
%?mm<|%xd(Ea)|%xd(Eb)|%xd(Ec)|%xd(Ed)>
45
+
#
46
+
# Playmode
47
+
%V(309,365,36,29,-)
48
+
%?mp<%xd(Fa)|%xd(Fb)|%xd(Fc)|%xd(Fd)|%xd(Fe)>
49
+
#
50
+
# Time Elapsed/Remaining
51
+
%V(32,339,300,20,-)
52
+
%al%pc%ac%?Sr<%pe %Sx(of) %pp|%pp %Sx(of) %pe>%ar%pr
53
+
#
54
+
# Album Art
55
+
%ax%Vl(a,82,38,195,161,-)
56
+
%Cl(0,0,195,161,c,c)
57
+
%Cd
58
+
#
59
+
# Track Info - Album Art
60
+
%ax%Vl(a,0,206,-,98,1)
61
+
%s%ac%?it<%it|%fn>
62
+
%s%ac%?ia<%ia|%?iA<%iA|%?d(2)<%d(2)|%(root%)>>>
63
+
%s%ac%?id<%id|%?d(1)<%d(1)|%(root%)>>
64
+
65
+
%s%ac%Sx(Next:) %?Ia<%Ia|%?IA<%IA|%?D(2)<%D(2)|%(root%)>>> - %?It<%It|%Fn>
66
+
#
67
+
# Track Info - No Album Art
68
+
%Vl(b,0,56,-,247,1)
69
+
%s%ac%?it<%it|%fn>
70
+
%s%ac%?ia<%ia|%?iA<%iA|%?d(2)<%d(2)|%(root%)>>>
71
+
%s%ac%?id<%id|%?d(1)<%d(1)|%(root%)>>
72
+
%ac%?iy<%iy|>
73
+
74
+
%ac%?ig<%ig|>
75
+
%ac%?fv<%(vbr%) |>%fb kbit/s %fc
76
+
77
+
78
+
%ac%Sx(Next Track:)
79
+
%ac%s%?It<%It|%Fn>
80
+
%s%ac%?Ia<%Ia|%?IA<%IA|%?D(2)<%D(2)|%(root%)>>>
81
+
%s%ac%?Id<%Id|%?D(1)<%D(1)|%(root%)>>
wps/cabbiev2/battery-360x400x16.bmp
wps/cabbiev2/battery-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/lock-360x400x16.bmp
wps/cabbiev2/lock-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/pb-360x400x16.bmp
wps/cabbiev2/pb-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/playmode-360x400x16.bmp
wps/cabbiev2/playmode-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/repeat-360x400x16.bmp
wps/cabbiev2/repeat-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/shuffle-360x400x16.bmp
wps/cabbiev2/shuffle-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/volume-360x400x16.bmp
wps/cabbiev2/volume-360x400x16.bmp
This is a binary file and will not be displayed.
wps/cabbiev2/wpsbackdrop-360x400x16.bmp
wps/cabbiev2/wpsbackdrop-360x400x16.bmp
This is a binary file and will not be displayed.