tsiry-sandratraina.com
A modern Music Player Daemon based on Rockbox open source high quality audio player
libadwaita
audio
rust
zig
deno
mpris
rockbox
mpd
1/*
2 * This config file is for IHIFI 760
3 */
4
5/* For Rolo and boot loader */
6#define MODEL_NUMBER 92
7
8#define MODEL_NAME "IHIFI 760"
9
10/* Define bitmask of input sources - recordable bitmask can be defined
11 explicitly if different */
12/* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */
13
14/* define the bitmask of hardware sample rates */
15#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
16 SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
17 SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
18
19#define HAVE_DUMMY_CODEC
20#define CODEC_SLAVE
21
22
23
24/* define this if you can flip your LCD */
25/* #define HAVE_LCD_FLIP */
26
27/* define this if you have a colour LCD */
28#define HAVE_LCD_COLOR
29
30/* define this if you want album art for this target */
31#define HAVE_ALBUMART
32
33/* define this to enable bitmap scaling */
34#define HAVE_BMP_SCALING
35
36/* define this to enable JPEG decoding */
37#define HAVE_JPEG
38
39/* define this if you can invert the colours on your LCD */
40/* #define HAVE_LCD_INVERT */
41
42/* define this if you have access to the quickscreen */
43#define HAVE_QUICKSCREEN
44
45/* define this if you would like tagcache to build on this target */
46#define HAVE_TAGCACHE
47
48/* define this if you have a flash memory storage */
49#define HAVE_FLASH_STORAGE
50
51#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
52#define NUM_DRIVES 1 /* NAND doesn't work yet */
53
54#define CONFIG_NAND NAND_RK27XX
55#define HAVE_SW_TONE_CONTROLS
56
57#define HAVE_SW_VOLUME_CONTROL
58
59/* commented for now */
60/* #define HAVE_HOTSWAP */
61#define SECTOR_SIZE 512
62
63/* for small(ish) SD cards */
64#define HAVE_FAT16SUPPORT
65
66/* LCD dimensions */
67#define LCD_WIDTH 320
68#define LCD_HEIGHT 240
69/* sqrt(320^2 + 240^2) / 2.4 = 166.7 */
70#define LCD_DPI 167
71#define LCD_DEPTH 16 /* pseudo 262.144 colors */
72#define LCD_PIXELFORMAT RGB565 /* rgb565 */
73
74/* Define this if the LCD can shut down */
75/* #define HAVE_LCD_SHUTDOWN */
76
77/* Define this if your LCD can be enabled/disabled */
78#define HAVE_LCD_ENABLE
79
80/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
81 should be defined as well. */
82#ifndef BOOTLOADER
83/* TODO: #define HAVE_LCD_SLEEP */
84/* TODO: #define HAVE_LCD_SLEEP_SETTING */
85#endif
86
87#define CONFIG_KEYPAD IHIFI_PAD
88
89/* Define this to enable morse code input */
90#define HAVE_MORSE_INPUT
91
92
93
94
95/* define this if you have a real-time clock */
96/* #define CONFIG_RTC RTC_NANO2G */
97
98/* Define if the device can wake from an RTC alarm */
99/* #define HAVE_RTC_ALARM */
100
101#define CONFIG_LCD LCD_IHIFI
102
103/* Define the type of audio codec */
104/*#define HAVE_RK27XX_CODEC */
105
106/* #define HAVE_PCM_DMA_ADDRESS */
107
108/* Define this for LCD backlight available */
109#define HAVE_BACKLIGHT
110#define HAVE_BACKLIGHT_BRIGHTNESS
111#define MIN_BRIGHTNESS_SETTING 0
112#define MAX_BRIGHTNESS_SETTING 31
113#define DEFAULT_BRIGHTNESS_SETTING 20
114#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
115
116/* Define this if you have a software controlled poweroff */
117#define HAVE_SW_POWEROFF
118
119/* The number of bytes reserved for loadable codecs */
120#define CODEC_SIZE 0x100000
121
122/* The number of bytes reserved for loadable plugins */
123#define PLUGIN_BUFFER_SIZE 0x80000
124
125/* TODO: Figure out real values */
126#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
127#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
128#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
129#define BATTERY_CAPACITY_INC 10 /* capacity increment */
130
131
132#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
133
134/* Hardware controlled charging with monitoring */
135#define CONFIG_CHARGING CHARGING_MONITOR
136
137/* define current usage levels */
138/* TODO: #define CURRENT_NORMAL
139 * TODO: #define CURRENT_BACKLIGHT 23
140 */
141
142/* define this if the unit can be powered or charged via USB */
143#define HAVE_USB_POWER
144
145/* USB On-the-go */
146#define CONFIG_USBOTG USBOTG_RK27XX
147
148/* enable these for the experimental usb stack */
149#define HAVE_USBSTACK
150
151#define USB_VENDOR_ID 0x071b
152#define USB_PRODUCT_ID 0x3202
153#define HAVE_BOOTLOADER_USB_MODE
154
155/* Define this if your LCD can set contrast */
156/* #define HAVE_LCD_CONTRAST */
157
158/* The exact type of CPU */
159#define CONFIG_CPU RK27XX
160
161/* I2C interface */
162#define CONFIG_I2C I2C_RK27XX
163
164/* Define this to the CPU frequency */
165#define CPU_FREQ 200000000
166
167/* define this if the hardware can be powered off while charging */
168/* #define HAVE_POWEROFF_WHILE_CHARGING */
169
170/* Define this if you have adjustable CPU frequency */
171#define HAVE_ADJUSTABLE_CPU_FREQ
172
173/* Virtual LED (icon) */
174#define CONFIG_LED LED_VIRTUAL
175
176#define RKW_FORMAT
177#define BOOTFILE_EXT "rkw"
178#define BOOTFILE "rockbox." BOOTFILE_EXT
179#define BOOTDIR "/.rockbox"