jcs.org
qemu with hax to log dma reads & writes
jcs.org/2018/11/12/vfio
1#ifndef GDBSTUB_H
2#define GDBSTUB_H
3
4#define DEFAULT_GDBSTUB_PORT "1234"
5
6/* GDB breakpoint/watchpoint types */
7#define GDB_BREAKPOINT_SW 0
8#define GDB_BREAKPOINT_HW 1
9#define GDB_WATCHPOINT_WRITE 2
10#define GDB_WATCHPOINT_READ 3
11#define GDB_WATCHPOINT_ACCESS 4
12
13#ifdef NEED_CPU_H
14#include "cpu.h"
15
16typedef void (*gdb_syscall_complete_cb)(CPUState *cpu,
17 target_ulong ret, target_ulong err);
18
19/**
20 * gdb_do_syscall:
21 * @cb: function to call when the system call has completed
22 * @fmt: gdb syscall format string
23 * ...: list of arguments to interpolate into @fmt
24 *
25 * Send a GDB syscall request. This function will return immediately;
26 * the callback function will be called later when the remote system
27 * call has completed.
28 *
29 * @fmt should be in the 'call-id,parameter,parameter...' format documented
30 * for the F request packet in the GDB remote protocol. A limited set of
31 * printf-style format specifiers is supported:
32 * %x - target_ulong argument printed in hex
33 * %lx - 64-bit argument printed in hex
34 * %s - string pointer (target_ulong) and length (int) pair
35 */
36void gdb_do_syscall(gdb_syscall_complete_cb cb, const char *fmt, ...);
37/**
38 * gdb_do_syscallv:
39 * @cb: function to call when the system call has completed
40 * @fmt: gdb syscall format string
41 * @va: arguments to interpolate into @fmt
42 *
43 * As gdb_do_syscall, but taking a va_list rather than a variable
44 * argument list.
45 */
46void gdb_do_syscallv(gdb_syscall_complete_cb cb, const char *fmt, va_list va);
47int use_gdb_syscalls(void);
48void gdb_set_stop_cpu(CPUState *cpu);
49void gdb_exit(CPUArchState *, int);
50#ifdef CONFIG_USER_ONLY
51/**
52 * gdb_handlesig: yield control to gdb
53 * @cpu: CPU
54 * @sig: if non-zero, the signal number which caused us to stop
55 *
56 * This function yields control to gdb, when a user-mode-only target
57 * needs to stop execution. If @sig is non-zero, then we will send a
58 * stop packet to tell gdb that we have stopped because of this signal.
59 *
60 * This function will block (handling protocol requests from gdb)
61 * until gdb tells us to continue target execution. When it does
62 * return, the return value is a signal to deliver to the target,
63 * or 0 if no signal should be delivered, ie the signal that caused
64 * us to stop should be ignored.
65 */
66int gdb_handlesig(CPUState *, int);
67void gdb_signalled(CPUArchState *, int);
68void gdbserver_fork(CPUState *);
69#endif
70/* Get or set a register. Returns the size of the register. */
71typedef int (*gdb_get_reg_cb)(CPUArchState *env, GByteArray *buf, int reg);
72typedef int (*gdb_set_reg_cb)(CPUArchState *env, uint8_t *buf, int reg);
73void gdb_register_coprocessor(CPUState *cpu,
74 gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg,
75 int num_regs, const char *xml, int g_pos);
76
77/*
78 * The GDB remote protocol transfers values in target byte order. As
79 * the gdbstub may be batching up several register values we always
80 * append to the array.
81 */
82
83static inline int gdb_get_reg8(GByteArray *buf, uint8_t val)
84{
85 g_byte_array_append(buf, &val, 1);
86 return 1;
87}
88
89static inline int gdb_get_reg16(GByteArray *buf, uint16_t val)
90{
91 uint16_t to_word = tswap16(val);
92 g_byte_array_append(buf, (uint8_t *) &to_word, 2);
93 return 2;
94}
95
96static inline int gdb_get_reg32(GByteArray *buf, uint32_t val)
97{
98 uint32_t to_long = tswap32(val);
99 g_byte_array_append(buf, (uint8_t *) &to_long, 4);
100 return 4;
101}
102
103static inline int gdb_get_reg64(GByteArray *buf, uint64_t val)
104{
105 uint64_t to_quad = tswap64(val);
106 g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
107 return 8;
108}
109
110static inline int gdb_get_reg128(GByteArray *buf, uint64_t val_hi,
111 uint64_t val_lo)
112{
113 uint64_t to_quad;
114#ifdef TARGET_WORDS_BIGENDIAN
115 to_quad = tswap64(val_hi);
116 g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
117 to_quad = tswap64(val_lo);
118 g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
119#else
120 to_quad = tswap64(val_lo);
121 g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
122 to_quad = tswap64(val_hi);
123 g_byte_array_append(buf, (uint8_t *) &to_quad, 8);
124#endif
125 return 16;
126}
127
128static inline int gdb_get_float32(GByteArray *array, float32 val)
129{
130 uint8_t buf[sizeof(CPU_FloatU)];
131
132 stfl_p(buf, val);
133 g_byte_array_append(array, buf, sizeof(buf));
134
135 return sizeof(buf);
136}
137static inline int gdb_get_zeroes(GByteArray *array, size_t len)
138{
139 guint oldlen = array->len;
140 g_byte_array_set_size(array, oldlen + len);
141 memset(array->data + oldlen, 0, len);
142
143 return len;
144}
145
146/**
147 * gdb_get_reg_ptr: get pointer to start of last element
148 * @len: length of element
149 *
150 * This is a helper function to extract the pointer to the last
151 * element for additional processing. Some front-ends do additional
152 * dynamic swapping of the elements based on CPU state.
153 */
154static inline uint8_t * gdb_get_reg_ptr(GByteArray *buf, int len)
155{
156 return buf->data + buf->len - len;
157}
158
159#if TARGET_LONG_BITS == 64
160#define gdb_get_regl(buf, val) gdb_get_reg64(buf, val)
161#define ldtul_p(addr) ldq_p(addr)
162#else
163#define gdb_get_regl(buf, val) gdb_get_reg32(buf, val)
164#define ldtul_p(addr) ldl_p(addr)
165#endif
166
167#endif
168
169#ifdef CONFIG_USER_ONLY
170int gdbserver_start(int);
171#else
172int gdbserver_start(const char *port);
173#endif
174
175void gdbserver_cleanup(void);
176
177/**
178 * gdb_has_xml:
179 * This is an ugly hack to cope with both new and old gdb.
180 * If gdb sends qXfer:features:read then assume we're talking to a newish
181 * gdb that understands target descriptions.
182 */
183extern bool gdb_has_xml;
184
185/* in gdbstub-xml.c, generated by scripts/feature_to_c.sh */
186extern const char *const xml_builtin[][2];
187
188#endif